hughesmarkie's Blue Clubby (n/a)
Engine
Now 1430cc A-series. Weber 45 DCOE Carburettor on Longman 5.5in Alloy Inlet Manifold polished and matched to the head. Pipercross Air Filter. Maniflow Big Bore three into one exhaust manifold, Maniflow Twin Box exhaust system.
Longman large port head with Rimflow valves. 36.5mm inlet and 31mm exhaust. 1.5 High-lift rockers. ISKY Can Followers. Kent VP8C Scatter Cam custom made from new blank.
Adjustable Tooth Belt Cam Drive. A- Series Think Flange Solid Centre Main Block. Offset Bored to 73.5mm.Howley Racing 84mm Long Stroke Wedged Crank. Lightened "Cooper S" Rods. Omega forged Pistons, All fully Lightened and Balanced. Special 7 gallon Alloy baffled fuel tank. Facet Red top electric fuel pump. Pro in-line fuel pressure regulator. Aldon Modified Distributor. Lumenition Electronic Ignition. Lucan Gold Sport Coil. 13 Row Oil Cooler. Special 2 Core Radiator. Currently running 136 bannans on its last trip to the rollers
Transmission
Ultrlight and balanced flywheel assembly, competition clutch. JK Straight Cut Close Ratio Four Speed, Four Sync Remote Shift Gearbox with Straight Drop Gears. Mini Torque Steer Cross-Pin Diff. 3:44 Final drive
Suspension
Replaced Rear Subframe with Speedex Beam. Front and Rear Spax Coil over suspension. Full Adjustable springs, dampers and ride height. Rose Jointed Lower Front Arms and Tie Rods. All adjustable for camber caster toe in and out
Brakes
Servo Assisted, Mounted in Car under Near side dash panel. Four Pot Calipers 8.4in Drilled, groved and vented discs. E.C.B Kevlar PAds at the front, Super Minifin Alloy Brake Drums at the rear. Stainless Steel Braided Front Brake Hoses
Wheels and Tyres
Revolution 6 x 13 Alloys custom coloured. 175 x 50 x 13 Pirelli P7F
Interior
Kevlar race seats, 6 point Roll Cage, 4 point Harnesses, custom Dash, race steering wheel, S./Steel plated floor, custom spare install,
Latest Blue Clubby (n/a) Blog Entry
25th Mar, 2008 | 0 Comments | Perma-Link
Just got the top half of teh engine rebuilt for a trackday in Mondello, which has now been cancelled, although I have sprung an oil leak right at the belt drive cover so i am going to have to sort that out!
