12 sec Intercooler, Plendium, all pipe work and brackets
Turbo Mini Forums

This could prove to be an expensive error but........

Im selling the complete intercooler set up off my car as I want to try something else.

You will get:
1x Intercooler Custom made by A+H Fabrications, when I was keen in my younger days I popped a thermocouple down the pipework and it was measuring 7 deg above ambient on 16psi
1x Stainless plenum with a special extra bit meaning that you need one less silicone hose
2x Aluminium Brackets to fit it as I was fitted on my car
All Silicone hoses to fit it as it was fitted on my car (I used a T2, but its only the one end that will need silicone pipe work change to use anything else
Aluminium Swaged intercooler pipework, This means it wont be popping off with boost

On my car I didnt run a grill. It poked out very slightly and I wasnt keen on spacing out the grill. Where as Matt Woods, Turbophil, Robert, and many other have done this and they seem to get away with it, I just didnt like the look.
My engine is tilted forward, and my front end is shorter than a regular steel one. I think it would fit behind one of these ok, or the corner of the end cap could be mildly altered by cutting off the corner of it and it should fit (I could get this done if you wanted to pay for it)

The pics are of it straight off the car, really I should have cleaned them up as the last time I used the car it was in the rain.















As you can see its all in really really good condition, and im only changing it as im going to fit a front mounted rad in too.

All you will need to fit it are some 2" hose clips

Im looking for £300 on this item of Turbo mini history

Hell you could take it straight to the Antiques Roadshow and they would tell you to insure it for £5k

Edited by Nic on 5th Mar, 2009.

Oh!

Before the Fentonator gets on my ass, its located in Hereford

how much for the s&m next gen??

how much for the s&m next gen??

i'd be interrested in the plenum if you split?

Damn! And I just bought a plenum off you. I would have been tempted by this.

If something is worth doing, it's worth doing half of.

Buy it anyway. I'm sure there's a market for BNIB 'NIC' plenums along with your current IC etc...

pm'd

If something is worth doing, it's worth doing half of.

you'll be selling the head next

Team Racing

is this the same intercooler which took made the first mini turbo a series ever to break the sub 13 mark?

Also the same one featued on the minifilms dvd?

Team Racing

nice plug there jim,lol,



so when is the TM premier of the dvd?

I have to say, since I bought Nics turbo off him I have somehow become quite a lady slayer.

So what are you trying instead?

"Cars are a lifetime of pain"

can you renmber the s&M heavy as fuck frame back in the day

now that was a horribly heavy frame

Indeed, and the Standard STA

PS Jim, the 12 sec head is lives in my bedroom

its well worth that Nic

dk s.o.b
that was heavy, sowas the warpig and sta's

i had an alloy 2-hip pork......it broke...lol

ahh the warpig!!

If they remade a lighter version today, id buy it tomorrow

what the hell are you doing nic?!!!!!

Will this intercooler make me more attractive to the ladies?

Keeping quiet nic? What do we reckon charge cooler? for lower temps on the strip? either way i'm sure it will be interesting to see.

"Cars are a lifetime of pain"

but then why not hang onto the plenum? I wonder if he is deserting the 5 porters? only time will tell:)