Nervous as f**k, deja-vu
Turbo Mini Forums

Paying a visit to uncle Ray at T&M tomorrow, the cars booked in at 08.30 and im shitting it, with all the problems I've had this year Ive a gut feeling its not going to be good, and so close to L2B.
Fingers crossed.
Shane

Edited by shane on 15th Jul, 2009.

eeeeeeek

good luck

Good luck!!

Let us know how you get on?

Whats the spec?

good luck mate, let us know the figures and spec

I know the feeling! my first trip to the rollers this year ended in 2 bent valves and a blown HG. 2 ex valves picked up in the guides, stuck open, twatted the pistons, and somehow 'lifted' the head and caused it to blow chunks out the back! Scary shit when that happens at 7k.

Second trip was much nicer though, came out smilling with 100 atw

Good luck, what boost you running?

Mr. Prawn, the friendly Crustacean- slowly making steps towards forced induction.

http://www.youtube.com/watch?v=jDp8yjdFAD4

http://www.youtube.com/watch?v=wH0acccijGk

HAHAHAHAAHAAHAHA

http://www.youtube.com/watch?v=elpOTR6a0U0

well at least your going to a reputable RR!

The spec is;
1293cc (morespeed mega's, think these will be the achillies heel)
AVB P2 cam
Benross head
Plenum from Nic
S2 Rs turbo I/C
Stage 2 r5gt t2 on mirage
Megajolt
Sccr box
Here is last years RR graph made good power on 6 pound. This year am running a 6 pound actuator and a greddy profec II spec b boost controllor so will have 3 levels of boost, off 6 pound, low 8, hi 12 (or higher)
Will let you know how it goes.
Cheers
Shane

Bud runs the Morespeed megas @ 16+psi with no issues. you should be ok. :)

WWW.TURBO-MINI.COM

Ahhh similar spec to mine!

What CR?

Get it cranked up to a bar and see how it goes:)

Dont forget videos.

My pistons in MOT were done at Morspeed, loads of banannas and still going 5/6 years later..

It'll be fine!

JF

awaiting the results shane :cool:

good luck mate, your in the BEST of hands as you know! cracking video Nik.

Edited by Miniwilliams on 14th May, 2009.

Best 1/4 mile 13.2 seconds @116 mph
First 5 port miniturbo to make over 200 bhp on a carb?
First 5 port miniturbo to make over 200 bhp on Injection?

http://www.mattwoodsphotography.com

Yes Matt Good hands indeed, thats why Ive going back to him.
The CR is 8.5 I believe.
Excuse my ignorance here, and for give me if im wrong, but was it the megas that we have seen a spate of ringland failures?
Cheers
Shane

Best of luck - will also be shitting my pants when mine goes on.

in fact its like that every time i turn the key..

jut keep it out of detonation!

accralites and omega pistons fair a "little" better under det.

the megas are an excellent piston developed for N/A Engines BUT! dont fair too well at all with detonation under BOOST

I have a feeling that Uncle ray know about det mate

Best 1/4 mile 13.2 seconds @116 mph
First 5 port miniturbo to make over 200 bhp on a carb?
First 5 port miniturbo to make over 200 bhp on Injection?

http://www.mattwoodsphotography.com

Uncle Ray is the man!

In the 13's at last!.. Just

defo he is , mind you i aint payed a visit yet this year i must go and see the old meastro

always looking for them bigger bunches of bannanas

I think he is fed up with me coming over and smoking the place out though.

Hopefully the next visit will be more successful!

In the 13's at last!.. Just