Long list of bits and boobs needed. please no more man boobs!!
Turbo Mini Forums

Ok hear goes....

Long clutch arm set up, literally everything from arm to roller bearing.

Slave cylinder and hose(sorted)

Sump plug with an extra long magnet.

Megajolt set up, i need the lot so any bits will help. (i have rung round a fue scrapers for the ford bits, but no joy yet). (MJ sorted Still need EDIS wheel and bracket)

A dizzy bracket to use for a blanking plate (Bodged :))

Pretty much full cooling set up, 2 or 4 core radiator, Top rad bracket 1275 one, Small water pump pulley.

Air filter (avonbar green one pref.)

Turbo again need everythig, GT1752, cozzy 2WD intercooler, various pipes, dump valve, 8PSI reg, oil feed and return pipes and fittings, Metro turbo inlet manifold, Various flanges :) and manifold bends needed, large bore zorst (play mini pref.)

Gauges, nice speedo of some discription (would like 100mph min) rev counter 8k min, boost gauge 30PSI, air fule ratio. (speed and rev sorted)

Solid bottom, front and rear, sub-frame mounts (bottom rear sorted), polly engine mounts, 1275 ultimate engine steady and gearbox steady arms X2 (G box sorted)

1.3 Roller rockers (blue minisport ones)

Nice subtle bonnet scoop (not 2 chavie) or glass fiber bonnet with one built in.

I think thats about it, i understand its a long list and most i will be able to get from mini spares or fleebay, but i would rather lace your hand with silver than theirs! and i may be able to save a bit of cash 2 :)

Thanks in advance!

Edited by maccamcvey on 28th Dec, 2009.

I have a braided pre verto clutch hose - the short one from slave cylinder to the bracket on the bulkhead. £5 posted.

Might have a pair of solid subframe mounts in the shed, will have a look over the weekend if nobody else has them to hand.

I think if you put a bulkhead box in you loose the mounting points for the ultimate engine steadies....

Edited by apbellamy on 11th Dec, 2009.

Medusa + injection = too much torque for the dyno ..https://youtu.be/qg5o0_tJxYM

Is that your sister Robert? :)

I will defo have the clutch hose, and mounts if you have them Pm me your bank details or paypall and i will send you the cash,

I am going to try and make a mirage style manifold so i don't have the cut the bulk head.

Thanks

Will I get to meet this lady when I come for my "troll round" in your mini ?

If so, must remember my heart pills !!

Boobs

On 11th Dec, 2009 robert said:

Pedro Silva

http://miniciados.blogspot.pt/

I'll have a dig in the shed over the weekend and PM you.

Nice one

boobies!

If something is worth doing, it's worth doing half of.

pm sent regarding speedo and rev counter.

cheers, Mark

yep, I need them...

Can't help with the bits sorry.

Boobs on the other hand...

If you use a decent blanking plug (Phils) the no need fo the dizzy bracket.

Fastest 998 mini in the world? 13.05 1/4 mile 106mph

Phils?? Turbo Phil or somebody else Will?

Turbo Phil

Fastest 998 mini in the world? 13.05 1/4 mile 106mph

I have a 2 and 4 core radiators that are sat around ill take pics and post them up

Own the day

will these do, theyre all ive got:

"Turbo's make torque, and torque makes fun"

"did you know you can toast potato waffles?"

Arrrrrrrrgggggggghhhhhhhhhhhhhhh!!!!!!!!!!!!!!! My eyes! I wish to unsee it please!

If something is worth doing, it's worth doing half of.

what the fuck is that? :/

I wonder if it's a picture of Joey?

If something is worth doing, it's worth doing half of.

sorry, id just woke up

"Turbo's make torque, and torque makes fun"

"did you know you can toast potato waffles?"

Joey that is so wrong on so many levels!!!


Thanks josh hope to hear from you soon

im gona keep my eyes shut when reading from now on. nice socks though

Boobies!!

at first it looked like this topic was picking up speed, then Joey happened

Do fat homosexuals perform tit wanks on each other?

Discuss...