18cc accralites in MPI block, Eaton M45, complete MPI engine/box
Turbo Mini Forums

Righty then chaps, sad as it is, my plans have changed, and I've realised that rather than hoarding parts for a future build, I'd be far better off sorting out all the current issues I've got on the car, so when I do finally build a new motor it's actualy capable of taking the power.

First up is my Eaton M45 charger, in absolutely Mint condition, it covered just 4000 miles on a bini before being removed in favour of JC S works package:

£200 posted



Block/pistons/rods:

Accralite 18cc forged pistons, fitted to lightened polished balanced A+ rods, sat inside a +020 low mileage MPI block with a centre main strap. Bought from Eaton_mini on here a few months back, it sadly never made it into my mini, but apparently just did a few hours running on his blow through injected setup. Never been used under any boost, or even made it to the open road. Dale said freshly bored block and pistons had done less than 10 hours running in total.

£400, can get pics on request.


MPI 1275 engine, complete engine, with head, inlet mani, injectors, throttle body, gearbox, clutch/flywheel, alternator, totally standard, removed from a 52k 98 cooper that was rear crashed. Owes me £250, offers, pics on request.

Lastly, I've got an MPI 5 groove bottom pulley with a 36-1 trigger wheel fixed to it, offers

Mr. Prawn, the friendly Crustacean- slowly making steps towards forced induction.

dang i was after an mpi engine, just spent all my money.

I'd like it too but cant afford it :(

tell em about it guys, I've realised I was planning a 150bhp engine build, into a car that's likely to fall apart, and handles however it fancies at any given moment. Time to get sensible sadly :(

Mr. Prawn, the friendly Crustacean- slowly making steps towards forced induction.

Interested in the MPi crank pulley.

Edit, £20+ post as it has the trigger

Edited by Sprocket on 12th Feb, 2010.

i think wolfie was after an MPI block?

i am after a short engine if you want to break the mpi lump sadly £250 is to rich for me when i dont want it all

how much you wanna pay for the short block?
im just after the F.D...lol

You have mail...



Deniz

69' Mini K Van
1986 Omni GLHS Shelby

pics of block and acralites please prawn. Maybe interested

As promised chaps, here are the pics:

Edited by Prawn on 13th Feb, 2010.

Mr. Prawn, the friendly Crustacean- slowly making steps towards forced induction.

I forgot to mention earlier, the block also has a brand new turbo oil pump fitted, as well as new cam bearings :)

Mr. Prawn, the friendly Crustacean- slowly making steps towards forced induction.

I wish this had appeared a few weeks ago!

i was thinking the same...

Sorry... about this but what am I missing, whats so good about this deal ?

The pistons are £400ish new Jimmy.
Not to mention all the other goodies in there already. It's a cracking deal.

If something is worth doing, it's worth doing half of.

MPi Crank Pulley??? ^^^^^^^^

:)

Sorry Sprocket, I rather rudely missed your last post!

I've got a mate locally who's seen this last night said he wants the MPI crank pulley, I'll text him in a mo and see if he's serious, and if not I'll definately let you know by tomorrow.


How come everybody wanted this stuff 2 weeks ago and now can't afford it! :(

Mr. Prawn, the friendly Crustacean- slowly making steps towards forced induction.

because its about two weeks after most peoples payday. :(

Always the way! Or you sell something, then you need it a week after!

Aaaaaaaaaaaaaah, my payday is tomorow! Strange company.....

if that's the case, I'm sure it'll still be here in 2 weeks time!

Mr. Prawn, the friendly Crustacean- slowly making steps towards forced induction.

Chaps, in light of my 1380 going on teh blink again, I think I'm going to scrimp and save, and try and build up a 1293 motor to turbo instead.

As a result, I'm going to be keeping the accralites, so for now I'm just selling the M45 charger, the worked A+ rods, and the 1293 MPI block.

Appologies to those interested.

Edited by Prawn on 15th Feb, 2010.

Mr. Prawn, the friendly Crustacean- slowly making steps towards forced induction.

How much for those bits then? Could be interested in the block.

As a rough guide, I'd say £100 for the bare block with CMS
£80 for the worked rods


Is it just the bare block you're interested in Tom?

Would you be interested in taking the block as payment for one of your crank sensor brackets and trigger wheels Tom? Only issue I could think of would be postage on a block- I'd imagine it's a lot.

Mr. Prawn, the friendly Crustacean- slowly making steps towards forced induction.

I'm interested in the block, but not at £100.