T2 Turbo Adapter plates
Turbo Mini Forums

Would many people here be interested in buying an adapter plate to enable you to fit a T2 or T25 turbo to a metro turbo manifold. They would be very accuratly CNC plasma cut from stainless steel. They would be around ?20 each, depending on demand.

Team Racing

Jimster,

go on then, I'd buy one off ya.

I'd get one just in case I wanted to go the T2 route at a later date.

I presume you would still need the bulkhead cutting for clearance? (mine's already done I was just thinking for those beginning projects)

John

Too many projects!

I'd have one

i dont think you do need to mod the bulkhead when using a t2 or t25, or do you seeing as you are still using a metty manifold and not the mirrage type. but i would like an adaptor plate please

A-series power! 1972|1310|T3 turbo|Omega pistons|Cantre main strap|Orange clutch diaphragm|AP race plate|Comp pressure plate|Lightened steel flywheel|13-row oil cooler|Vernier duplex timing gear|Phase 2 Piper cam|Green air filter|Hi boost carb needle/spring|2"Stainless exhaust|3"Play mini stainless rear box|Jack Knight s/c 4spd gearbox|Jack Knight s/c drop gears|Silicon coolant hoses|Lumenition HT leads|GAZ lowered height shocks all round|Steel flip-front|Rear safety devices cage|Group 5 arches|6x12 deep dish Minilites|Surf blue/Old english white|

yes you still need todo the bulk head mods

Team Racing

These are a well proven design (even if i say so myself)...

It angles the turbo relative to the manifold to ensure clearance for the downpipe - but it will still need tweaking to suit the turbo and manifold - but this won't take long at all!
Basically - it is ready to fit, with the a fair whack of the hard work and figuring out already done!

D

Jim,

how many takers do you need to make this viable?

John

Too many projects!

if you need one more then I'll have one :)

alex

AlexF

i already have a T2 fitted. well it was before the engine died. but i would have 1 or 2 off you.

ok, I'll get 5 made next week and take it from there

Team Racing

Jim,

Put me down for two, As I know someone else who'll want one..

ta

Too many projects!

Hi Jim,

I would be interested if you can send it to Croatia.

Tonci

i'd be interested

Andy

I've seen the future and tbh its Pie

Ill take one Jim

If you make a post in the for sale section thats purely to place your name for an order ill top it so everyone sees it.

Jim,

Any news on these?

After chatting to TurbDave I think I might be going the T2 route earlier than I orignally anticipated.

Ta

John

Too many projects!

John, I'm like a fart, sorry I'll get back on the case, should have an update this week for you

Team Racing

Cheers Jim,

Mail me on

glock8mm"at"hotmail.com

with any news.

TurbDave's got my work mail address if you need it.


John

Too many projects!

hi jim, are you still doing them adapter plates, if you are put me down for one please.



alex.heap@ntlworld.com

Jim, pull your finger out... people want/need these!

Yep me too!

Got the T2 sat waiting to go on!!

I'm actually waiting for dave to knock together a document showing want else is needed apart from the plate when fitting the t2. I don't want people to think thats all you have todo.

Team Racing

Come on then dave, its time to pull your finger out now!

Just curious but what do you do in the way of a downpipe? Is it a modded one for another car or completely made from scratch?

what the...

How the.....


first i've heard about this document?

(off to check old emails)

you did agree todo this a while back mate, as the writer for a famous mini mag, this should no be childsplay

Team Racing

Confession time. I'm a tw4t!

I will knock somet up and get it hosted on the manchester minis site in the next 10 days.