16v K-head engine bits, 970 crank, Zcars A-series Subframe and extra\'s
Turbo Mini Forums

Hi all,

Im selling up some of my stuff, im running out of room for it all!!

Brand new Z-cars A-Series Subframe, Built up but never used, paid over £1500 for it... looking for £1000

Kad 4 pots, 1 season old with new pads and dimple and groove discs - SOLD

16v BMW Head, stripped but apart from that complete - SOLD

16v BMW Head, broken through while porting but could be repaired or used as mock up for building - SOLD

Genuine Cooper 'S' 970 crank ... Wedged and polished, freshly ground and ready to go, cost me over £1k but im looking for £750

1380cc Block, prepped for 16v head. Only done 20 dyno miles - £100

BMW 16v Head larger valves, I had them custom made in the USA and they are + 2mm on both inlet and exhaust. - £300

SC/CR Gearbox with S/C timkin roller bearing drops and trannex LSD. Freshly rebuilt - £1200

Loads more stuff ask if you need summit!

Location is Smart Performance.. (B79 0JU)

Cheers Chris

Edited by 01smartc on 11th Oct, 2011.

What size are the 4 pots?

If something is worth doing, it's worth doing half of.

8.4"

:( Too big.

If something is worth doing, it's worth doing half of.

Does the damaged head come with valves etc or is it just bare?

In the 13's at last!.. Just

Pm d re 4 pots. Can you .post?

Audi s4 b5 - 470bhp & 486ft lbs

On 30th Apr, 2012 Brett said:
yeah stick the bit in and give it a wobble

Damaged head is bare mate

I'll take the head if its still going?

https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel

www.fusionfabs.co.uk



1/4mile in 13.2sec @ 111 terminal on 15psi

Damaged one or normal one?

Damaged one if you've still got it?

https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel

www.fusionfabs.co.uk



1/4mile in 13.2sec @ 111 terminal on 15psi

Yep ... just to confirm its been broken through on the inlet port and has no valves or cams etc.. just a bare fucked casting.

But ive still got it :)

Its yours Matty.

In the 13's at last!.. Just

Would the fucked head happen to have any spare cam cover retaining nuts and grommets lying around?

Hi there bud, if the calipers are still available please let me know. I'm in need desperately, also additionally - when you say the subframe is built up can you advise what it comes with..? May need a subframe myself andmcould be an alternative to buying bottom arms / topp arms / tie rods etc... Please let me know asap.

shit smart you dont half good stuff going all the time! all the best :)

Calipers have gone.

The subframe has all the arms, drop links and shocks all built up ready to drive. Just needs hubs

Chris

I'll definitely have the damaged head then. I'll check what work ive got on, i'll hopefully be working around your way to come and collect it, if thats ok?

https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel

www.fusionfabs.co.uk



1/4mile in 13.2sec @ 111 terminal on 15psi

Yer no probs just pop in :)

i would have had that box if i had the cash at hand as i need an LSD and a new box!

Would you take offers on the subframe?

Yes... make me one :)

I'll be over tomorrow to collect the head, if thats ok?

Any chance you can PM me your address and what time you'll be about?

https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel

www.fusionfabs.co.uk



1/4mile in 13.2sec @ 111 terminal on 15psi

THe 970 crank, is that BMC or something else?
What is it ground to? Any pictures?

What do you mean BMC or somthing else?

its ground to 10 / 10

Its wrapped up in film from the grinders i'd rather not remove to stop it going rusty. But if your really serious I will get it out.

Chris

I mean if BMC made it or did anyone else make it? :)