Selling up (gt2056 and subby added)
Turbo Mini Forums

Decided im definitly not going a series turbo so wont need the following

My gt2056 (dont wanna sell but vtecing is dearer than i thought :( ) 200 with flanges



And some various stanless steel 1 1/4 pipes and mandrel bends the lot for 80



med damper and sensor new there 155 and 60 so call it 180 and ill chuck in my cover in the photo aswell.

Sold.

Next a megajolt setup including the edis and coilpack, sensor and a usb seriel converter cable 160?



Next are some minisport 1.5 negative degree arms and ajustable bushed tierods 106 new including vat so 60 quid

Sold

Brand new metro turb fuel regulator new on minispares 47 inc so 40 quid



Next is my polished mg rocker cover £25



Next is a new waterpump 10pounds

Sold

One turbophil drydeck kit new,

Sold

Next is varous mini castings (gear selector sold) have the whole lot pickup only 35 quid



Next is a starter motor tenner takes it



Here a silicone t3 elbow with inner coating fiver??

Provisionally sold

Heres a gasket set.

Sold

Heres the engine mount with turbo holder 20 quid with a matching powdercoated alternator bracket.



Here where the turbo sat



Next is my jedi wheels there mini pcd but will need a spacer to be usable, fresly powdercoated and polished, 160 quid

Sold

Next is what was given to me by mra as an oil cooler kit... Well it isnt but a tenner for the lot?



My front subby. Its lightened (ish) seam welded with extra corner supports, all rose jointed fully adjustable, new tip a bearings and shafts on powdercoated top arms, new ish donuts on minisport hilos new set of solid mounts, new engine mounts. Never even hit the road, 550quid ono







If you have and question or comment please pm me. I havnt includes postage ad ill weigh evrything as and when unless collection fron nn15 area is prefurred.

Thanks.

Edited by Rick.SPI on 18th Jul, 2012.

I'll take te oil cooler fittings if they are1/2"

I run a supercharger and I don't care the TB is on the wrong side.
VEMS + 12 PSI + Liquid Intercooler = Small Bore FUN!

an i have the
manfold 3 flanges
gasket set
gear change houseing

Edited by madmk1 on 8th Jul, 2012.

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

V4 MJ? Do you have plugs for the edis and coil!?

Is it 30 quid posted for the dry deck kit?

Also interested in dry deck kit if Adrian drops out

Minivanless, but reluctantly happy living with the decision. There'll be another one day.
http://www.youtube.com/profile?user=minimadmotorman#p/u

il take the t3 silicon 90 please

Edited by wng691s clubby on 9th Jul, 2012.

Done now needs redoing lol

Would you post the starter motor? If so, I'll have that please.

Here a silicone t3 elbow with inner coating fiver??

I'll have this please.

WWW.TURBO-MINI.COM

Interested in wheels - PM sent

I'll take the negative camber arms!

Hi. Replyed to as many pms and comments in lunch break ad possible...will reply to the rest after work.

Thanks.

could be interested flanges if you will split from the turbo and pipework

Yes i moved to the darkside

Instagram @jdm_brett

What comes with the MJ? Very interested :)

What is the dimensions on the wheels?

www.shag.no

Next in line for dry deck please

rick

Heres a photo showing the plugs left on the edis and coil



I think the oil cooler atachments are 5/8 not 1/2



Anyone want this? Tenner?



A set of pushrods... Tenner



Clutch master cylinder (have to check what type) but 15 quid.

sold

Standard dampener tenner takes it?



5pound breather

Edited by Rick.SPI on 11th Jul, 2012.

Hi mate, if that clutch cylinder (isn't that a slave not a master?) is a pre-verto then i'll take it :)

http://www.turbominis.co.uk/forums/index.p...tid=469104&fr=0

Dry deck provisionally taken ill change notify if otherwise.

Think your right mate. :) lol

Erm ill check the part numbers next time im at the workshop because im not too sure what it is, i should have checked before really.

Edited

Items added to original post.

Edited by Rick.SPI on 17th Jul, 2012.

Just had a look on minispares and it looks the same as the verto one, so not much use to me i'm afraid

http://www.turbominis.co.uk/forums/index.p...tid=469104&fr=0

Ok mate no worries.

Verto has the bleed nipple on the top, pre verto on the back if i remember right.