Ordering hoses, burlen bits, fuel pumps and turbo kits this weekend- get your requests in.
Turbo Mini Forums

Right, Now I've got sorted again after being away I know a fair few of you want hoses, some that asked before i went away, some during/after i got back.

I'm now in a position to order these hoses and and carb bits, fuel pumps and turbo rebuild kits you need.

The prices are the best you find, you all know roughly what these bits cost.

Any specials need to be specifically asked for and are non-refundable. Ill sort out bills over the weekend via paypal if you pm you emails. Leave what you want on this post as well so i can just print it out and fax it off in one go as i may miss an individual PM. If you need a bill for posting cheques then let me know.

Apologies for the delay but its been very hectic!!

Cant do silicon hoses at the minute, can do turbo rebuild kits and fuel pumps though.

cool, just let me know the cost of the hoses and gaskets i ordered and i'll paypal u straight away :)

Can you list exactly what you need on here so i can just print this post out to do my order from Saves me missing anything out thats all.

oil feed pipe braided
oil return elbow

cheers mate

If it breaks... build a much faster one

Pair of braided hoses for Fiesta brake conversion, Please

Plenum gasket.

defo 2 sets of plenum to carb and 2 sets of the plenum join gasket.

Also, if that chap hasnt already started the hoses, hold on them, if he has started i'll have them.

he hasnt started the hoses, im not ordering till the end of this weekend so i wont bother with your hoses at the moment. thats no problem.

thanks ian, i just want to get things measured up properly before i order them.

Iain, how do you want paying for the hoses?

When they arrive, which will be sometime towards the end of the week it will be cheque or paypal, or if you want to fetch yours and pay cash thats fine. can also take to avon park to save people postage, ill be there both days.

Cheers Iain, i'll Paypal you when your ready, don't know when i'd be ale to get over, flat out with work at the moment.

Knackers, just found out that burlen dont do the plenum half gasket, i know i had one in a top end gasket set from clough and wood i think it was (anybody know if that names correct?)

Everything else is on its way, slight delay but not much due to the extra custom hoses.

I'm grabbing some stock though.

Iain, can you get me a turbo oil feed please.

Got cash waiting :)

MSN me.

ok dude, no worries

Could do with a diaphragm for pressure regulator, dunno if you caould get them or failing that possibly a regulator.

FSE are the place for these

Got any contact details for FSE mate as I could use a diagphram as well?

http://www.fuelsystem.co.uk/

Alex, your turbo feed is on its way to me with the rest of the order.

thanks mate.

OK Cheers Iain I've sent them an email.

I have sent them an email before but they dont seem very good at replying!! so if you have any luck Tom let me know

ring ring...

Do you need paying yet Iain?