Valve seat question
Turbo Mini Forums

It seems as Minisport are making 33mm small bore inlets form their catalogue. They might come in handy. Getting hold of the 32mm Rimflow ones are diffucult. After doing a couple of 202 heads recently, it's obvious that the exh throat is severely restrictive. the 1" valve surely does nothing for flow. I'm trying a 26,5 or 27mm exh valve here on my 1130 (?) Should do the job.

are 295's & 202's exhausts comparable?

I was under the impression the 295 was more like the 940 (from memory the cross sections in viz's yellow book suggest so aswell)

"Turbo's make torque, and torque makes fun"

"did you know you can toast potato waffles?"

The 295 has got a slightly bigger port runner volume, but the shape is similar and valve sizes are both 1" which does not at all help for flow.

well mine are a massive 1.040" so nerrrr.... :)

"Turbo's make torque, and torque makes fun"

"did you know you can toast potato waffles?"

post up some pics of your larger exhausts when there done, what inlets you using? is this for a turbo? are they going in a 202 or 295?

joe

"Turbo's make torque, and torque makes fun"

"did you know you can toast potato waffles?"

Joe or Benross, why did you have to upsize the intake valve? Couldn’t you have replaced the valve seat and still used the 30.93mm?

Joe, what did you do with your 30.93 intakes….did you return them or are you stuck with them?

there on a shelf in my garage, do you want them?

"Turbo's make torque, and torque makes fun"

"did you know you can toast potato waffles?"

That may have been the fastest reply ever...I PMed you.