Page:
Home > Help Needed / General Tech Chat > Where has everyone mounted the EDIS stuff??

998turbomini25

297 Posts
Member #: 2276
Senior Member

sheffield / derby

26th Mar, 2010 at 10:53:54pm

i've mounted mine similar to gr4h4ms
heres a pic



luke

haimesyboi

User Avatar

392 Posts
Member #: 5702
Senior Member

Cornwall

27th Mar, 2010 at 09:41:32am




On 27th Feb, 2007 Carl said:
is it ok to mount the EDIS next to the megajolt unit. im planning on putting both of them behind me glovebox area. but theyll probably only be a couple of inches apart, will this be ok?



Ive got them both in there nice and dry, edis heat sinks to the bulkhead and there is easy/tidy access to the mj.

wil_h

User Avatar

9258 Posts
Member #: 123
Post Whore

Betwix Harrogate and York

27th Mar, 2010 at 02:03:10pm




On 26th Mar, 2010 998turbomini25 said:
i've mounted mine similar to gr4h4ms
heres a pic



luke


You could remove the clamp off your dizzy blanking plug, they don't fall out. The MRA ones don't acctually come out (if you can get them in!!)

Fastest 998 mini in the world? 13.05 1/4 mile 106mph



On 2nd Jan, 2013 fastcarl said:
the design shows a distinct lack of imagination,
talk about starting off with a clean sheet of paper, then not bothering to fucking draw on it,lol

On 20th Apr, 2012 Paul S said:
I'm mainly concerned about swirl in the runners caused by the tangential entry.


Carl S
Forum Mod

User Avatar

1927 Posts
Member #: 1761
Stalker

Bristol

28th Mar, 2010 at 07:34:25pm

Terry, I have my EDIS unit and coilpack mounted exactly as you have described.

I fabbed up a small bracket to attach the coilpack to the existing bracket out of 3mm ali. However, this has since cracked over months of harsh ride abuse, and so I am thinking of adding some rubber damping to the mount holes.

The EDIS unit is simply bolted to the bulkhead beside the wiper motor.

mini93

User Avatar

834 Posts
Member #: 2017
Post Whore

Warwick.

28th Mar, 2010 at 11:18:12pm



theres mine, escuse the rustyness, was a tad rushed when i was putting it back together and im just far too lazy to take everything off to paint it now!

David.

joeybaby83

User Avatar

6274 Posts
Member #: 509
Post Whore

Isle of Man

2nd Apr, 2010 at 12:33:54am

finally made up my mind, got all of the gubbins bolted in now, and pluged in to each other (the standard ford loom i got with the edis stuff was the perfect length, so used it without any modification :) )







stole the coil pack position off rallymini, looks spot on

stuck the edis 4 bit above the offside tower bolt with a bit of a heat sink out of an old car stereo attached



just need to wire it to the car now, make sure its firing at 10 btdc and then stick the mj on

"Turbo's make torque, and torque makes fun"

"did you know you can toast potato waffles?"


Home > Help Needed / General Tech Chat > Where has everyone mounted the EDIS stuff??
Users viewing this thread: none. (+ 1 Guests) <- Prev  
To post messages you must be logged in!
Username: Password:
Page: