This mornings rolling road results.
Turbo Mini Forums

Many thanks for the nice replys, on the road it goes without saying that it pulls quite well I only ran 18psi on the rollers so i feel more confident about running 16psi on the road, knowing im not on the limit all the time if you know what i mean. Ray did comment the power was not tailing off when he backed off on my shift light set at 6000 so would may have made a tad more with a few more revs, but i just dont like to rev it. Call me what you like but its just a personal type thing. "bloddy wimp"- who said that!!
Dont mind sharing my engine spec....
1380, 266 cam, 1.3 rockers, rimflow inlet and exhaust valves, flowed head with 30cc chambers, 11cc cast omegas, -31 actuator, T3 turbo 0.36 ex housing, playmini exhaust, R5 pace intercooler, grey diaphram, ap plate then all the usual suspects ( sccr box, drops, x-pin, steel flywheel etc).

Thanks again.

-MINI CLUBMAN 1380 TURBO-

Excellent result mate. :)

https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel

www.fusionfabs.co.uk



1/4mile in 13.2sec @ 111 terminal on 15psi

yes welcome to the club, I wish i could join!

Best 1/4 mile 13.2 seconds @116 mph
First 5 port miniturbo to make over 200 bhp on a carb?
First 5 port miniturbo to make over 200 bhp on Injection?

http://www.mattwoodsphotography.com

Well done mate! So how many are in the Club now?

Team Racing

Just T3

Best 1/4 mile 13.2 seconds @116 mph
First 5 port miniturbo to make over 200 bhp on a carb?
First 5 port miniturbo to make over 200 bhp on Injection?

http://www.mattwoodsphotography.com

Excelent!!

especially on that boost. Well done.

cool result - well done

If Carling made Mini engines
it would probably be like this one!

nice one, alex issigonis will be turning in his grave.who'd have thought it from an A series.

133.5 bhp 123 lb torque 116mph @6640rpm 9.5psi
Shakespear RWYB 14.995 91.83mph

Well done mr, Hope it all goes well for ya.

Its only a bit of metal. If it blows it blows!

http://www.putfile.com/mini300bhp

club?

AlexF

I will have a wild guess and say, the over 200 banana club:)

Congrats on a nice result

By the way..

200 bannanas equates to approximatly 10 hands or 3.33 bunches.

superb tony

the 1380s do make the power

it feels all so diffrent with a big overboar

have you any details for uncle rays rolling road
(ie) a website ?

that's impressive result very efficient regarding boost and revs, well done !

as I'm building a 1380 with omegas 11c ,are yours decked? I'm interested in knowing which cr have you used and what is your full advance timing
regards
fab

Well done mate!!! A real torque monster

Shouldnt there be a special Turbo Minis Badge, similar the 'I Kept TM Alive!' for those who are in the 200bhp club.

Printouts to be forwarded, LOL

Wern't you running a 276?

have you swaped it out or was it always a 266?

min13- spot on mate it was a 276, swapped to a 266 at the beginning of last year.

Benross- http://www.t-m.co.uk/

fab- pistons not quite flush with deck, i get 14cc volume there. I work it out to be 8.3-1CR with 30cc head and bk450 head gasket (could be wrong!)
Do you mean advance timing under boost because thats 26 degrees?

-MINI CLUBMAN 1380 TURBO-

yes that's for timing under boost,
Harry found that it's best at around 30° as it increase power curve and decrease egt, does this was for 14, 16 or 18 psi ?you mensioned that you have retarted timing when upping boost to 18 psi,
Steve (Benross) recommended 8.2, I think I will not keep my cr as high as I wanted ,cause I'll loose under boost all what I 'll gain under part thrttle and fuell
thanks
fab

great result 200+ bananas

it's not even my car and i'm smiling behind my computer......

a lot off pony's eeeh bananas

there is nothing wrong with a A-series that a turbo can't fix.

www.turbomini.nl

LOL, cheers paneermeel:)

26degrees was at 18psi, it runs more advanced timing with less boost.

-MINI CLUBMAN 1380 TURBO-

thanks :)
fab

gosh thats a lot of timing ,what fuel were you using tony ?
thanks for the open attitude to sharing data by the way .
regards
robert

Medusa + injection = too much torque for the dyno ..https://youtu.be/qg5o0_tJxYM

Yes it is a lot of timing Tony!!

Best 1/4 mile 13.2 seconds @116 mph
First 5 port miniturbo to make over 200 bhp on a carb?
First 5 port miniturbo to make over 200 bhp on Injection?

http://www.mattwoodsphotography.com

It's



I'll get my coat.


























And go home listening to my new CD:

Edited by Vegard on 1st Mar, 2007.

I only like one song by Chris deBurgh, but I guess I could always change for this: