Avonbar Oil Feed Pipe
Turbo Mini Forums

The fitting that goes between the T and block is 1/8bspt to 1/8 bspt (male to male) and IIRC the other fitting that goes on the T is 1/8 bspt male the 5/16 JIC?

I seriously would bother using the 1/8 bspt male to male fitting supplied as they are feeble as feck....get a brass one. I tried using the one supplied, it only went 3 threads in then started going in on the piss!

Edited by matty on 13th May, 2007.

https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel

www.fusionfabs.co.uk



1/4mile in 13.2sec @ 111 terminal on 15psi

cheers matty, have ordered 4 from thinkautomotive, so may have a few spare if anyone else gets the wrong kit from avonbar.

133.5 bhp 123 lb torque 116mph @6640rpm 9.5psi
Shakespear RWYB 14.995 91.83mph