Crank Sensor Brackets - 2nd run planned - gauging interest
Turbo Mini Forums

Tom i,ll have a Bracket and Pulley.
Thanks

I'm stupid Ive A fiesta with most of the bits to make my megajolt thingy. Thick or what!!!! OHHHHH and ive got a metro for free !!!!! Metros have become rare over here!!!!!!!!!
http://s216.photobucket.com/albums/cc273/weewheels_2007/

Just for info Tom, i've fitted mine along with a small denso alternator and no clearence problems what so ever.

These are top quality guys and look like OE, actually they look better than OE.

i would make a run of 20 tom

Looks like some gona have a nice summer holiday lol.
Tom do you need a exchange pulley.

I'm stupid Ive A fiesta with most of the bits to make my megajolt thingy. Thick or what!!!! OHHHHH and ive got a metro for free !!!!! Metros have become rare over here!!!!!!!!!
http://s216.photobucket.com/albums/cc273/weewheels_2007/

I'd like to add my interest too please Tom.

Cheers
Rich

yes, tom would like exchange pullys from everyone gents

im interested too tom as i need to get one for the clubby and one for the K100 engine for later in the year!

Feb, 2008 at 08:18:23pmPM User | Quote
I'll have a bracket and pulley please ( if you do more than ten )

1. Jay#2
2. Stefaz
3. Paul S (poss 2 off)
4. Martpaul
5. BillyBoy
6. Neil8p - bracket and pulley
7. alandavies215
8. adam1330
9. ollie
10. cossierick
11. metroturbo
12. 8portchris - bracket and pulley
13. weewheels -bracket and pulley

I'm stupid Ive A fiesta with most of the bits to make my megajolt thingy. Thick or what!!!! OHHHHH and ive got a metro for free !!!!! Metros have become rare over here!!!!!!!!!
http://s216.photobucket.com/albums/cc273/weewheels_2007/

Once again if you do more than 10

1. Jay#2
2. Stefaz
3. Paul S (poss 2 off)
4. Martpaul
5. BillyBoy
6. Neil8p - bracket and pulley
7. alandavies215
8. adam1330
9. ollie
10. cossierick
11. metroturbo
12. 8portchris - bracket and pulley
13. weewheels -bracket and pulley
14. racing_is_life - bracket and pulley

Cheers

A few points of clarification-

1. You will need to supply a damper style pulley to be machined with the trigger pattern.

2. The setup is arranged to place the trigger point 90 degrees BTDC. This is the standard place for MegaJolt, most of the aftermarket ECU's allow you to tell them where the trigger is.

3. As the title states, at the moment we are gauging interest only. Please don't flood me with PM's about the whys and hows just yet. If they do go ahead (which looks very likely) then details will be made available to everyone at that time. One of the things that made it difficult last time was the ordering process, so this will be different this time around.

Tom, send one my way pal payment through paypal no probs at all.

1. Jay#2
2. Stefaz
3. Paul S (poss 2 off)
4. Martpaul
5. BillyBoy
6. Neil8p - bracket and pulley
7. alandavies215
8. adam1330
9. ollie
10. cossierick
11. metroturbo
12. 8portchris - bracket and pulley
13. weewheels -bracket and pulley
14. racing_is_life - bracket and pulley
15. Richie - Bracket only

Edited by Richie on 5th Feb, 2008.

______________________________________________________
TRADER HALL OF FAME
BENROSS...MINIMARK..WOLFIE (comic genius).....CARL....MARTPAUL.......AXEL
______________________________________________________
TRADERS OF SHAME
1 user....pm me 4 details

LEGENDS
MikeRace, Mini13

blimey ...STAMPEDE!!!!!!!!

Medusa + injection = too much torque for the dyno ..https://youtu.be/qg5o0_tJxYM

here's a pic of them fitted, just incase your interested.

https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel

www.fusionfabs.co.uk



1/4mile in 13.2sec @ 111 terminal on 15psi

Hi Tom, can you put me down for a bracket please mate!

Edited by Richie on 6th Feb, 2008.

______________________________________________________
TRADER HALL OF FAME
BENROSS...MINIMARK..WOLFIE (comic genius).....CARL....MARTPAUL.......AXEL
______________________________________________________
TRADERS OF SHAME
1 user....pm me 4 details

LEGENDS
MikeRace, Mini13

Tom how much is the Bracket on its own BTW, there is a price quoted for the wheel on its tod, or the pair together, but not the bracket on its tod. :)


Richie

______________________________________________________
TRADER HALL OF FAME
BENROSS...MINIMARK..WOLFIE (comic genius).....CARL....MARTPAUL.......AXEL
______________________________________________________
TRADERS OF SHAME
1 user....pm me 4 details

LEGENDS
MikeRace, Mini13

1. Jay#2
2. Stefaz
3. Paul S (poss 2 off)
4. Martpaul
5. BillyBoy
6. Neil8p - bracket and pulley
7. alandavies215
8. adam1330
9. ollie
10. cossierick
11. metroturbo
12. 8portchris - bracket and pulley
13. weewheels -bracket and pulley
14. racing_is_life - bracket and pulley
15. Richie - Bracket only
16. Dizzle - bracket and pulley
17. Sumpnut - Bracket only
18. Chris4500uk - Bracket only

It was quoted as £50 for the bracket, and £35 for the pulley IIRC

Right then guys.

Following the display of interest, we are going to make a batch of 20 crank sensor brackets.
Phil is going to get these underway, in a couple of weeks time when he has got going with them we will be asking those people who want pulleys to go with them to send in exchange pulleys and payment.

What I want from people still seriously interested is an email. NOT A PM!

SUBJECT TITLE- Crank Sensor Bracket

In the email I want the following information and the following information ONLY.

YOUR NAME
FORUM USERNAME
BRACKET? YES OR NO
PULLEY? YES OR NO

Please use an email address you do check as this is how I will get in touch with you when the time comes.

Email to- tom.fenton (at) blueyonder (dot) co (dot) uk


Anyone not following the above instructions will be shot!
Thank you.

Tom What will you use to shoot people?

I think a Blunderbuss has a comic value

I run a supercharger and I don't care the TB is on the wrong side.
VEMS + 12 PSI + Liquid Intercooler = Small Bore FUN!

Will you ship overseas? I wanted this set a while back for my turbo 1100 build, but they were NLA :(

Out of curiosity will they fit an A series engine?

Obviously supplying a pulley might be a problem but I could supply the money for a new one to use?

So now all I need to know is the cost of a new pulley and shipping to Australia

Cheers,
Sam

email sent

““A turbo: exhaust gasses go into the turbocharger and spin it, witchcraft happens and you go faster.”” - Jeremy Clarkson

e mail sent, to confirm pulley and bracket please

Emailo sento