Ring gear style triggerwheels
Turbo Mini Forums

Hi, ive sent you a PM with the details, as far as sensor brackets go, i think Tom Fentons mate was doing some, but not for a while yet... i think Specialist components do them too. or make one!

Sooperdooperturbocooperexpertengineering!

HAD ONE OF THESE ALL, THEY TOP TRUMPS!

nice chap too! a pleasure to do b uisness with

SKYLINES ARE LIKE CLITS, EVERY FLANGE SEEMS TO HAVE ONE: see this sticker on my silvia

the Search-section on this forum is blummin superb & simple to use, unlike some other forums, without the search-section & the help of this bunch of chaps on here i'll never be able to !!!Start the day with a 998cc turbo!!! :) i'm getting closer though!

Tom Fenton says: I have it all, make me an offer

My second one (I wanted a spare!) has just arrived. Spot on again Ross.

Note for jonb_5 .... when you're thinking about a bracket some of the "bought" ones (including, I think Tom's one) are meant for a pulley which has had the teeth machined directly into the damper part of the pully so the sensor will be in a different position to using one of these. Check first or make your own. I made my own but I specifically wanted one of these wheels because I put mine on the back of the pulley.
http://www.turbominis.co.uk/forums/index.php?p=vt&tid=220230
I just have to be different....

Schrödinger's cat - so which one am I ???

I have looked at a couple, and to be honest I think I could make my own bracket, I have afew pictures and can fabricate it around the sensor, do I just have to aim it at the wheel as square on a possible? Is that the idea, 90 degress of TDC.

Thanks

Jon

Jon,
The sensor has to be 90° anti clockwise of the missing tooth, (looking at the waterpump end) no matter where you situate it. i have see ones fitted to the 2 bolts holding the engine mount plate to the engine, pointing straight up, and then the wheel just rotated to suit.

if you start the car running on the EDIS only (MJLJ not connected) you get 10° fixed advance. get a timing light on it, if it says 10° then its spot on..... if not, adjust the trigger wheel to suit,. its a simple as that.


Rod,
im loving the fitting on the back of the pulley, got any closeups of how you mounted it? maybe i could adjust sizes on the wheels to suit better fitment. or even easier ways of fitting the sensor.


Dave, Glad your happy with it, good ole natter we had!! LOL.

Ross.

Edited by mini-marauder on 24th Jul, 2008.

Sooperdooperturbocooperexpertengineering!

Received mine yesterday.

Will have it fitted tommorrow night.

Great stuff!

Thanks

Jon

Jon, No probs..

Still got some more if anyone else want one..

Ross.

Sooperdooperturbocooperexpertengineering!

I'll have one.

Hi, Sorry, been on holiday, PM me and ill tell you where to sebnd payment and ill get one to you. Cheers, Ross.

Sooperdooperturbocooperexpertengineering!

Will there be one available in a few weeks? Getting bits as i need them at the moment so dont need one just yet!

But just wanted to insure I get one as they look just the trick.

Cheers

Yeah, im sure there will be, ive got a couple left still. PM me when you need it.
Ross.

Sooperdooperturbocooperexpertengineering!

Coupe, got your payment, its in the post tomorrow AM.

Cheers Ross.

Sooperdooperturbocooperexpertengineering!

Cheers muchly!

richminiturbo,
did you still want one?? only have a few left now. Cheers, Ross

Sooperdooperturbocooperexpertengineering!

pm'd matey