Bleed Valve Recommendations
Turbo Mini Forums

john i will explain when you come to pick up the head

Cheers Steve

If something is worth doing, it's worth doing half of.

i use a hdi boost controller is had dual settings so 2 boost settings
a few of my friends use them on starlets i recommend them easy to wire in 3 wires pos neg and ingition

this is where i got it from

http://cgi.ebay.co.uk/HDI-full-electronic-...A1%7C240%3A1318

"Tuning should be a compromise between what is possible and what is necessary"

10)Thou shalt always quest for more power

I use a GReddy Profec B2 programmable boost controller.

Really easy to install (as per HDI comments from turbominij).

Setting up is ok but takes a bit of time to understand all the lingo.

Rock solid boost with no spiking or variability. You say you want low boost at say 6, 8, 10 psi, that's what it gives you. You can programme how progressive you want the boost to come in as well. You hit the high boost button and as long as you've programmed your hi-boost settings, you get exactly that - switchable boost (and it'll work properly if you're able to set up the fuelling for both events - carbs are crap at this but I'm learning - I can see why EFi is so popular).

However, if I had the choice over again, I'd probably have gone for the Turbosmart E-Boost in its round 'dash dial' style.

The Greddy kit is available part used on Ebay for as little as £80 these days.

Richard.

Minivanless, but reluctantly happy living with the decision. There'll be another one day.
http://www.youtube.com/profile?user=minimadmotorman#p/u

Thanks for all the advice so far guys.

If something is worth doing, it's worth doing half of.