13 sec quater mile 1380 engine
Turbo Mini Forums

LMAO! I think he's getting pissed of at silly questions

hang on.... the clutch case has been painted red, that will make the verto clutch handle the power

thats a bit of a re-track although his statement that the 'engine' does 13second 1/4 seems to stand - perhaps sitting in the boot of a topfuel dragster

if the previous owner spent loads on a resto, he was conned

Edited by Rob Gavin on 20th May, 2009.

He has just revised his add...

Our questions seemed to have worked!

(I must have too much time on my hands!!)


HERE WE HAVE MY MINI 1380 PROJECT ITS A 1000CC MINI CITY I STARTED TO REBUILD THE CAR OVER 12 YEARS AGO AND HAVENT GOT VERY FAR WITH IT DUE TO NOT KNOWING MY ARSE FROM MY ELBOW, MY CRACK HABIT, BEING A COMPULSIVE LIAR AND A HOUSE MOVE AND WORK COMMITMENTS ...THE CAR DESERVES TO BE STARTED AND FINISHED TO A HIGH STANDARD AND SHOWN OFF :) THE EIGHT PREVIOIUS OWNERS SPENT A SWEET FA ON THE CAR HAVING IT RESTORED VERY POORLY BUT UNFORTUNATLY BEEN STOOD FOR 11 YEARS THE SILLS, BOOT FLOOR, REAR SUBFRAME SCUTTLE PANEL FRONT FLOOR, REAR FLOOR, A PANELS AND ROOF HAVE ROTTED AWAY AND WILL REQUIRE REPLACING AND A SMALL HOLE ON THE O/S/F A POST THE SIZE OF A LARGER BADGER APART FROM THAT THE CAR IS SOLID FLOORS AND BOOT ARE IN RUBBISH CONDITION FOR AGE OBVIOUSLY THERE MIGHT BE SOME MORE AREAS THAT NEED ATTENTION BUT THIS CAR IS WELL WORTH FINISHING IF YOU HAVE GOT LOADS OF CASH AND TIME OR A NEW SHELL TO REPLACE IT.

THE ORIGINAL SEIZED ENGINE IS OUT AT THE MOMENT AS I WAS GOING TO HAVE ONE LAST ATTEMPT AT DOING IT SO WILL NEED TO BE TRAILERED AWAY UNDER A SHEET TO THE POLICE DON'T SEE IT.

GOODISH (WELL NOT VERY GOOD) POINTS !!

THE CAR COMES WITH A VAST AMOUNT OF SPARES, MAINLY ESCORT AND SIERRA, SCRAP METAL, CABLE INSULATION

BODY KIT ONE SIDE PIECE SADLY GOT BROKEN BUT EASY TO REPLACE AS YOU CAN BUY A WHOLE NEW BODY KIT

1380 (OR 1275CC) ENGINE THAT COST OVER £22 TO BUILD AND WASnt RUNNING 13 SECOND QUARTER MILES. IT HASnt GOT A FULL RACE HEAD WITH BIG VALVES, RACE CAM, LIGHTWEIGHT CRANK, STEEL RODS, 1.5 ROLLER ROCKERS, TITANIUM TOP CAPS, SWIFTUNE FLYWHEEL/BACKPLATE, STAIGHT CUT BOX/DROP, LSD OR 73.5 OMEGA FORGED PISTON TO MAKE IT A 13 SECOND ENGINE.

OIL COOLER

2 BONNETS

LARGER FUEL TANK

REAR OPENING SIDE WINDOWS (RARE)

FULL INTERIOR (SKODA FABIA)

AND MANY PARTS THAT ARE CURRENTY SAT IN MY KITCHEN, I HAVE NO DOUBT THAT I HAVE,NT MISSED LOTS OF PARTS

BAD POINTS :(

AS YOU WILL SEE FROM THE PICS THERE IS HEAPS OF WELDING TO BE DONE BUT MOST HAS'NT BEEN DONE

NO LOG BOOK WITH THE CAR AS IT GOT LOST WHEN WE ROBBED IT BUT I HAVE REFLECTED THIS IN THE PRICE THIS IS A CASH ON COLLECTION( USED NOTES WITH UN CONSECUTIVE SERIAL NUMBERS) THANK YOU

VIEWING IN A LAYBY OF MY CHOICE IS HIGHLY RECOMMENDED THE PHOTOS DO IT JUSTICE AS IT IS A PILE OF SHITE AND IT WILL BE A SHOW WINNING CAR ONCE A 10 THOUSAND POUND FULL RESORATION AND COMPLETE ENGINE AND GEARBOX REBUILD IS COMPLETED, FINISHED and FULLY REStORED WITH 5 GRAND SPENT ON ENGINE/RUNNING GEAR 1380 MINIS EASILY DO £3500 ON EBAY SO GOOD PROJECT ANY QUESTIONS PLEASE DONT HESITATE IN CALLING ME ON 999 AND ASK FOR DICK

THANK YOU FOR LOOKING AND HAPPY BIDDING

JF...:):):):):):)

LMAO

ebay is so much fun

Another reply

I dont think your even getting a 1380

I know I'm not. I wouldn't touch that with your's....

He has more chance of platting shit than he does selling that

1/4 Mile 14.3secs 96Mph Terminal 10psi of boost.


Fibreglass Parts? - http://www.tdkracing.co.uk/
Split Rims? - http://www.force-racing.co.uk/

What is your facination with shit at the moment MikeRace? HAHA

i dunno, my botty has been burping alot lately tho think its the beer!

1/4 Mile 14.3secs 96Mph Terminal 10psi of boost.


Fibreglass Parts? - http://www.tdkracing.co.uk/
Split Rims? - http://www.force-racing.co.uk/

LMAO at JF's revised more accurate add
there really is so many chancers on ebay!

a JF classic lol

"Turbo's make torque, and torque makes fun"

"did you know you can toast potato waffles?"