| Page: |
| Home > General Chat > 1460 turbo | |||||||
 10022 Posts Member #: 1456 Mongo Barnsley, South Flatcapshire |
18th Sep, 2009 at 11:24:06am
On 18th Sep, 2009 Jimster said: +1
Ian, do your self a favour and don't use an antique turbo like t3, the new GT series turbo are miles ahead If you are trying to build a tractable car a modern quick spooling turbo would be miles better. If something is worth doing, it's worth doing half of. |
||||||
 198 Posts Member #: 345 Advanced Member Guildford Surrey |
18th Sep, 2009 at 02:04:04pm
Ok thanks for the info, will check it out as they say,
|
||||||
|
198 Posts Member #: 345 Advanced Member Guildford Surrey |
18th Sep, 2009 at 02:58:46pm
Gary, no track day stuff as I prefer going round corners to straight line stuff,
|
||||||
|
Site Admin  9407 Posts Member #: 58 455bhp per ton 12 sec 1/4 mile road legal mini Sunny Bridgend, South Wales |
18th Sep, 2009 at 03:11:29pm
what race series did you race in ian? On 15th May, 2009 TurboDave said:
I think the welsh one has it right! 1st to provide running proof of turbo twinkie in a car and first to run a 1/4 in one!! Is your data backed up?? one extra month free for all Turbo minis members, PM me for detials |
||||||
|
198 Posts Member #: 345 Advanced Member Guildford Surrey |
21st Sep, 2009 at 11:17:13am
I raced in Special saloons in my Cooper S but with a short stroke 1297 lump in from 1975 to 1981 then Metro's then MG Metro's then Metro Turbo's then in a Honda in 1988/9 Guest driver for Hoda UK did the 24 hour race at Snetterton in a Civic, have driven F3, Formula Fords, Sterling Moss's old MGB at the GP circuit Silverstone on a track day event, 1990
|
||||||
|
198 Posts Member #: 345 Advanced Member Guildford Surrey |
23rd Sep, 2009 at 02:29:29pm
crankshaft, splined nose with matching flywheel ordered, 16 weeks for delivery???
|
||||||
|
10022 Posts Member #: 1456 Mongo Barnsley, South Flatcapshire |
23rd Sep, 2009 at 03:05:05pm
I should have one in a few weeks when the van's engine is torn down. If something is worth doing, it's worth doing half of. |
||||||
|
198 Posts Member #: 345 Advanced Member Guildford Surrey |
1st Oct, 2009 at 09:55:47am
let me know when the cams are avaiable and I will sort you out with some bits that you might need.
|
||||||
|
5795 Posts Member #: 80 AFRacing LTD Newbury, Berks |
2nd Oct, 2009 at 12:36:50pm
I've got lots of old cams knocking about... how many would you like? AlexF |
||||||
|
4018 Posts Member #: 1757 Back to Fucking Tool status Swindon |
2nd Oct, 2009 at 04:06:47pm
i got one of these, but dont you want a newer gt turbo?
On 1st Oct, 2009 AV-R Technologies said:
Also need turbo T3 exhaust elbow Ian Drives
|
||||||
| Home > General Chat > 1460 turbo | |||||||
|
|||||||
| Page: |