Page:
Home > Show Us Yours! > Some cars at Combe

richminiturbo.

User Avatar

2370 Posts
Member #: 719
Post Whore

Horndean - Near Portsmouth

They're absolutely ballistic arent they!!

9/10 times they and baldwin were sliding sideways exiting the last corner, still with the pedal through the floorpan!


Prawn

User Avatar

667 Posts
Member #: 5232
Post Whore

basingstoke

that's not a mighty mini though.....

that's Julian Howells extreme mighty mini, a series which i THINK was unlimited a few years back when he used to race.
I seem tor ecall it had some insanely lairy 1380 5 port in it, making monsterous power like 150bhp+

I know for sure it's REALLY quick in a straight line

Mr. Prawn, the friendly Crustacean- slowly making steps towards forced induction.


steve d

User Avatar

32 Posts
Member #: 2517
Member

Mold, North Wales

Thought it was a exteme mighty mini.


richminiturbo.

User Avatar

2370 Posts
Member #: 719
Post Whore

Horndean - Near Portsmouth

Saw your car prawn when in the paddock stood next to my mates red/orange miglia rep, think youd just finished a run, car looked wicked!


jonb_5

329 Posts
Member #: 3193
Senior Member

Torbay, Devon

Did anyone see the yellow mighty mini flying around, it had to be the quickest mini out there.

I have done a bit of research and the driver was Peter Crewes.

Aparently in runs on bio-ethanol fuel with a 1380 engine and 7 port head. You could see the sock filter through the front of the bonnet.

Anyone know what HP he is putting out?

Cheers

Jon


richminiturbo.

User Avatar

2370 Posts
Member #: 719
Post Whore

Horndean - Near Portsmouth

That the Britax one?


Oli

User Avatar

1733 Posts
Member #: 1910
Post Whore

Wilts

It is.

On 15th Jul, 2009 fastcarl said:
the pissed up clown stood back up, did a twirl and left bollock naked,


chinlesswonder

User Avatar

530 Posts
Member #: 1192
Post Whore

In the garage......again!!

I overheard him talking to someone ready to go out with him, 160bhp i think he said

133.5 bhp 123 lb torque 116mph @6640rpm 9.5psi
Shakespear RWYB 14.995 91.83mph


gr4h4m

User Avatar

4890 Posts
Member #: 1775
Post Whore

Chester

It went past me like the clappers... I tell you what they dont give you much room in the corners... I had to give some two some room in the chicanes! I bit extreme for a track day.

I run a supercharger and I don't care the TB is on the wrong side.
VEMS + 12 PSI + Liquid Intercooler = Small Bore FUN!


chinlesswonder

User Avatar

530 Posts
Member #: 1192
Post Whore

In the garage......again!!

I agree, thought there was supposed to be no overtaking in the bends? i think they are keen to impress the passengers.

133.5 bhp 123 lb torque 116mph @6640rpm 9.5psi
Shakespear RWYB 14.995 91.83mph


gr4h4m

User Avatar

4890 Posts
Member #: 1775
Post Whore

Chester

I know and for us newbie's taking a late or wide line into an already tricky chicane is not easy, just to let them through when they could do you as soon as you came out.. I could have closed the door on one car and put us both off.... Lucky those F-Brakes of mine did the job and let me turn in late..

Still good fun. I did take some caution when approaching or catching cars.

I run a supercharger and I don't care the TB is on the wrong side.
VEMS + 12 PSI + Liquid Intercooler = Small Bore FUN!


nick1275

250 Posts
Member #: 1615
Senior Member

Ferndown, Dorset


i encountered overtaking on the bends, obviosly rules dont apply to some people. BAC"S

On 28th Sep, 2009 chinlesswonder said:
I agree, thought there was supposed to be no overtaking in the bends? i think they are keen to impress the passengers.

On 1st Mar, 2009 MikeRace said:
Hmmm weberyyy


On 21st Apr, 2009 madcatminis said:
I hope she's got knickers on or you'll have a funny runny mark on your bonnet. Quite like what a snail leaves behind.


richminiturbo.

User Avatar

2370 Posts
Member #: 719
Post Whore

Horndean - Near Portsmouth

Mr Baldwin prefers racing round the paddock to the actual track I think haha.


Rob H

4314 Posts
Member #: 700
Formerly British Open Classic

The West Country

Your not supposed to over take on the bends, the problem is when you get stuck behind a slow driver in a fast car who canes it down the straights so you can't pass them and then tiptoes round the bends.

Edited by Rob H on 28th Sep, 2009.

Isambard Kingdom Brunel said:
Nothing is impossible if you are an Engineer


Paul R

User Avatar

4018 Posts
Member #: 1757
Back to Fucking Tool status

Swindon

tell me about it, one 200sx + crap driver = boring


On 28th Sep, 2009 Rob H said:
Your not supposed to over take on the bends, the problem is when you get stuck behind a slow driver in a fast car who canes it down the straights so you can't pass them and then tiptoes round the bends.

Drives
-Ford S-max Mk2 Ecoboost
-Rover 100 VVC #2 - track project

Searching is all you need on TurboMinis


Scruffy

User Avatar

1451 Posts
Member #: 328
Post Whore

Seaford Rise, South Australia

Mr Crewes was also running slicks along with a few others which was not reallky fair!

On 5th Sep, 2011 Vegard said:
I stand corrected. You should know *wink*



Johnny

User Avatar

1183 Posts
Member #: 6926
Post Whore

Accrington

WOW loving the pics guys, im so sorry i never introduced myelf especially to you ollie since you was sat next to my car for a couple of hours *tongue* all i could hear all round that track was my wheels in the arches! i managed to get upto 110mph on the straight i then did something to my wheel bearing or discs as when i was breaking the steering wheel was wobbling sooo much that i had to come off track on my 2:30 run... clutch was slipping in 3rd ? ? ? ? i have grey diaphragm and 6 paddle sintered plate......... getting hot? it has 130lbps of torque at the moment... not sure on hp as the RR guy could only get it to 4,700rpm but it got 105bhp @ 4,200rpm


shane

User Avatar

2644 Posts
Member #: 1246
Post Whore

Lowestoft, Suffolk.

Normally I wouldn't of minded but not as I was trying to keep the arse of the car where it should be, god I need to fettle the handling, the piss poor driving didnt help, but happy to bask in my own glory at catching a very nasty tank slaaper out of the chicane!
Shane


On 27th Sep, 2009 Ollie said:
Damn Paul clearly we didn't blend in as well as we had hoped! Haha.

Thanks very much for letting us on your stand Keith it was very kind of you.

Was great to meet a few more tm guys, another thank you goes to shane and Paul for letting me passenger on track (appologies for holding your hand at one point during your session shane, I will let you explain)

Was a great day, helped by the great weather and track action.

Ollie


On 27th Sep, 2009 chinlesswonder said:
This is johnnys turbo, also found this young man hanging around our site selling stuff :)


shane

User Avatar

2644 Posts
Member #: 1246
Post Whore

Lowestoft, Suffolk.

God Paul if I had of know you wasnt gonna be fussy I'd just of pointed and shot, pmsl! OOOoo er!
Shane


On 27th Sep, 2009 Paul R said:
young man would be ollie lol :) cheers for letting us camp up with you was nice to meet you again *tongue*

by chance did you get any pics of my beest on track, shane got a few pics but the camera was being a gay and getting good pics all the time :(

Home > Show Us Yours! > Some cars at Combe
Users viewing this thread: none. (+ 1 Guests) <- Prev  
To post messages you must be logged in!
Username: Password:
Page: