| Page: |
| Home > General Chat > 6 Speed mini box | |||||||
 703 Posts Member #: 105 1st to provide proof of a running Bimmy Conversion! Brisbane ,Australia |
18th Aug, 2010 at 05:52:48am
i`ve got a 6-speed, mini dog engagement box that`s not going to be for sale www.miniman.com.au
|
||||||
|
1394 Posts Member #: 1346 Post Whore bromsgrove |
18th Aug, 2010 at 07:34:49am
there is now one forsale on tmf |
||||||
 16540 Posts Member #: 4241 King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner Rotherham, South Yorkshire |
18th Aug, 2010 at 08:18:54am
Just thinking out loud...
On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it 
|
||||||
 1451 Posts Member #: 328 Post Whore Seaford Rise, South Australia |
18th Aug, 2010 at 09:48:53am
No the JKD five speed is 4kg heavier than the KAD 5 speed and being an overdriven box consumes more power than a 1:1
Edited by Scruffy on 18th Aug, 2010. On 5th Sep, 2011 Vegard said:
I stand corrected. You should know  |
||||||
|
1451 Posts Member #: 328 Post Whore Seaford Rise, South Australia |
18th Aug, 2010 at 09:51:07am
On 18th Aug, 2010 MadMatt said:
i`ve got a 6-speed, mini dog engagement box that`s not going to be for sale 
http://www.youtube.com/watch?v=Rh9Gr8fhinI 5th is one:one & 6th is an over-drive On 5th Sep, 2011 Vegard said:
I stand corrected. You should know |
||||||
 8604 Posts Member #: 573 Formerly Axel Podland |
18th Aug, 2010 at 09:55:29am
On 18th Aug, 2010 apbellamy said:
Just thinking out loud... On the strip, would a 5 ot 6 speed box be any improvemnt over a 4 speed? More gear changes means more time of the throttle and less time in each gear John Haston was running 12 second quarters using just 3 gears at the weekend! That's also with a cammy 16v engine, although very lightweight. 4 gears is plenty, particularly with a turbo. Saul Bellow - "A great deal of intelligence can be invested in ignorance when the need for illusion is deep."
|
||||||
|
16540 Posts Member #: 4241 King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner Rotherham, South Yorkshire |
18th Aug, 2010 at 09:58:43am
That was my thinking. We have a very short first in the van, so we are dropping into 4th near the end of the strip. A longer first may mean that we can stay in third and gain an extra 10th or two by not letting of to change gear On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it
|
||||||
 10022 Posts Member #: 1456 Mongo Barnsley, South Flatcapshire |
18th Aug, 2010 at 10:00:44am
I think the main bug bear on the van is the 60ft times as you have to snag 2nd after about 30ft! If something is worth doing, it's worth doing half of. |
||||||
|
1451 Posts Member #: 328 Post Whore Seaford Rise, South Australia |
18th Aug, 2010 at 10:03:10am
On 18th Aug, 2010 apbellamy said:
That was my thinking. We have a very short first in the van, so we are dropping into 4th near the end of the strip. A longer first may mean that we can stay in third and gain an extra 10th or two by not letting of to change gear On 5th Sep, 2011 Vegard said:
I stand corrected. You should know |
||||||
|
10022 Posts Member #: 1456 Mongo Barnsley, South Flatcapshire |
18th Aug, 2010 at 10:07:45am
We have a 3.1 in there already. It's the helical box which has a short 1st in it.
If something is worth doing, it's worth doing half of. |
||||||
|
13 Posts Member #: 9004 Member |
18th Aug, 2010 at 11:07:52am
On 16th Aug, 2010 Tom Fenton said:
On 16th Aug, 2010 ewok said:
it cant be that hard ! It can be that hard!! It only hard if you cant do it yourself! |
||||||
 11046 Posts Member #: 965 Post Whore Preston On The Brook |
18th Aug, 2010 at 01:02:51pm
On 18th Aug, 2010 ewok said:
On 16th Aug, 2010 Tom Fenton said:
On 16th Aug, 2010 ewok said:
it cant be that hard ! It can be that hard!! It only hard if you cant do it yourself! I like how there are a few that think that these things are easy 
at least some of us realise how difficult these things really are.That is not to say that it cannot be done, but its not just a matter of fitting a gearset from a bike into a mini gearbox. I am still wondering how this sliding reverse gear will be engaged, not to mention where this sliding gear has come from. Again this is not to say that it cannot be done, but its not exactly a 'simple' fit is it?. Besides that, as others have said, is there any real need for more than four gears. top fuel drag cars only have three gears, and the common six speed transmissions on modern cars are mainly on the narrow torque band deisels. On 26th Oct, 2004 TurboDave16v said:
Is it A-Series only? I think it should be... So when some joey comes on here about how his 16v turbo vauxhall is great compared to ours, he can be given the 'bird'... On 26th Oct, 2004 Tom Fenton said:
Yep I agree with TD........ |
||||||
|
10022 Posts Member #: 1456 Mongo Barnsley, South Flatcapshire |
18th Aug, 2010 at 01:12:16pm
or high revving v8 motors such as the audi rs4 and the v10 m5 has a stupid 7 speed box. If something is worth doing, it's worth doing half of. |
||||||
 159 Posts Member #: 1997 Advanced Member Lichfield |
18th Aug, 2010 at 02:03:58pm
On 18th Aug, 2010 Sprocket said:
Besides that, as others have said, is there any real need for more than four gears. top fuel drag cars only have three gears, is drag racing the only application for a non standard gearbox? wouldn't more than 4 gears be useful on a circuit? |
||||||
|
16540 Posts Member #: 4241 King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner Rotherham, South Yorkshire |
18th Aug, 2010 at 02:06:22pm
same principle as drag racing - you want to get up to speed and slow down as quickly as possibly. more gears won't really help that imo On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it
|
||||||
|
111 Posts Member #: 29 Advanced Member Croydon |
18th Aug, 2010 at 02:27:51pm
On 18th Aug, 2010 Monkeh said:
is drag racing the only application for a non standard gearbox? wouldn't more than 4 gears be useful on a circuit? I really depends on the torque curve of the engine in question. If you have a really peaky N/A motor, then lots of close gears is the way to go. If you're got a turbo motor with a nice spread of torque, then you don't need it so much. It also depends on what your required top speed is. Many modern cars with 6 (or more) speed boxes, have very high top speeds, for this you need more gears to be able to pull high top speeds, and also be able to have reasonable acceleration low down. Too many projects! |
||||||
 2909 Posts Member #: 83 Post Whore Glasgow, Scotland |
18th Aug, 2010 at 06:44:06pm
id say more gears is better for a circuit, as you can choose a gear thats going to pull you out of the apex of any corner the longest. on drag gear changes are waisting time. i only use 3 gears in total (2 changes) aswell. turbo 16v k-series 11.9@118.9 :)
|
||||||
 7765 Posts Member #: 74 I pick holes in everything.. Chief ancient post excavator |
18th Aug, 2010 at 09:36:06pm
Let's not forget this one....
Edited by Vegard on 18th Aug, 2010. On 13th Jul, 2012 Ben H said:
Mine gets in the way a bit, but only when it is up. If it is down it does not cause a problem. |
||||||
|
4018 Posts Member #: 1757 Back to Fucking Tool status Swindon |
18th Aug, 2010 at 10:22:59pm
my dad's got a 7speed double clutch jobbie in his 335 5th at the redline is about 145ish not to sure why they have the 7th tbh probably hit 200 if it had the power lol Drives
|
||||||
|
159 Posts Member #: 1997 Advanced Member Lichfield |
19th Aug, 2010 at 12:11:07pm
On 18th Aug, 2010 Paul R said:
not to sure why they have the 7th tbh for some seriously good mpg id say. i wish i had another gear in my t5 :( |
||||||
|
703 Posts Member #: 105 1st to provide proof of a running Bimmy Conversion! Brisbane ,Australia |
20th Aug, 2010 at 09:02:01am
Our`s was made by KG-Engineering here in Aust (now folded)
www.miniman.com.au
|
||||||
 453 Posts Member #: 6449 Senior Member Brisbane, Australia |
20th Aug, 2010 at 01:47:32pm
I always wondered how much stuweys 6 speed was worth, but never had the balls to ask lol.
On 20th Aug, 2010 MadMatt said:
, if it can be made to be repaired easier than ours, would also be a bonus,,, if it were cheaper than ours would be a double bonus ($10K) In boost we trust |
||||||
| Home > General Chat > 6 Speed mini box | |||||||
|
|||||||
then we finally sorted that & it`s all good again
| Page: |