Page:
Home > Help Needed / General Tech Chat > brack clearance on exacton wheels and a tyre question

almichie

User Avatar

824 Posts
Member #: 2065
Post Whore

Wiltshire

24th Jan, 2012 at 01:45:50pm

Its not the bleed thats the problem - its the people that fit them upside down....

The other issue with minsport calipers is the dust o ring doesn't sit as a dust ring forever - they tend to pop out with use - just be aware of that. They may have resolved that issue by now.

If there is anyone in the wiltshire area with 7.9" vented i have a spare wheel that I am happy to trial fit.

On 7th Nov, 2011 apbellamy said:
 Shaft seems nice and snug


On 24th Mar, 2012 apbellamy said:
no no no no, you need more boost! you can never ever come on here and say I have enough boost, that's just silly.


On 29th Mar, 2010 Star Mag said:
these give no problems with good head

munnracing

User Avatar

136 Posts
Member #: 5193
Advanced Member

Dunstable

24th Jan, 2012 at 08:11:00pm

when i posted up i can advise only on the kad brakes that the 7.9inch setup did not fit after sending my wheels upto kad and them test fitting them onto the various setups i ended up with the 7.75 setup


jamz

User Avatar

1342 Posts
Member #: 2292
Tool

Herne Bay, kent

24th Jan, 2012 at 10:29:50pm

i order 7.9s today after being told by someone running same set up exactly. very tight though so wheel blancing needs to be more of a fine art than whack stick on weights on

On 27th Apr, 2010 Rick.SPI said:

cant beat a good blowout.


turbochargedstu

User Avatar

831 Posts
Member #: 908
Post Whore

gateshead

25th Jan, 2012 at 07:41:17am

i just used stick on weights on the inner rim of the wheel rather than knock on type on the rear edge.

balls to the blower!!!



1330,stage3 head, gt1549, canems ecu, S/C box and drops

jamz

User Avatar

1342 Posts
Member #: 2292
Tool

Herne Bay, kent

25th Jan, 2012 at 08:39:29am

ill see how much clearance i have and where ill put the weights.

On 27th Apr, 2010 Rick.SPI said:

cant beat a good blowout.

Home > Help Needed / General Tech Chat > brack clearance on exacton wheels and a tyre question
Users viewing this thread: none. (+ 1 Guests) <- Prev  
To post messages you must be logged in!
Username: Password:
Page: