Page:
Home > General Chat > rolling road.

Nic

User Avatar

9326 Posts
Member #: 59
First mini turbo to get in the 12's & site perv

Herefordshire

you will be missing out on an easter egg matt


CJ

38 Posts
Member #: 686
Member

Lincoln

I would be hoping to get it ready for then being a first time build and would be great to see how it goes. Iain do you happen to have Marks number, we are hoping to go see him about the turbo head, and some other bits. Thanks


iain
Site Admin

User Avatar

8506 Posts
Member #: 16
Sold the turbo and seeing what the C20XE can do!

Near Lincoln

*smiley*

Edited by iain on 20th Sep, 2005.


Jimster
Site Admin

User Avatar

9407 Posts
Member #: 58
455bhp per ton
12 sec 1/4 mile road legal mini

Sunny Bridgend, South Wales

I?d be really keen to get this done asap. I can?t believe how much different rolling roads read, but yet every operator insists that theirs is spot on! I suppose that?s why it?s all bananas and pub talk!

A few months back I took my car to Vmax to get it checked over on the roller, I came out with 187 bhp. I have changed nothing on the car and yesterday took the car to emerald, as always to get a comparison, we did a power run on the car as it was. At the same boost, I only managed 130 bhp! Now that is some difference!! I did however come out with a shade over 160 bhp, which is an increase of 30 bhp or banana?s. so I?m happy with that


Team Racing

On 15th May, 2009 TurboDave said:

I think the welsh one has it right!


1st to provide running proof
of turbo twinkie in a car and first to
run a 1/4 in one!!

Is your data backed up?? one extra month free for all Turbo minis members, PM me for detials


iain
Site Admin

User Avatar

8506 Posts
Member #: 16
Sold the turbo and seeing what the C20XE can do!

Near Lincoln

Thats a good increase mate, shows what you were lacking at avon.
How's the clutch?


Jimster
Site Admin

User Avatar

9407 Posts
Member #: 58
455bhp per ton
12 sec 1/4 mile road legal mini

Sunny Bridgend, South Wales

clutch is holding up fine now, since I fitted the double grey and sintered plate

Team Racing

On 15th May, 2009 TurboDave said:

I think the welsh one has it right!


1st to provide running proof
of turbo twinkie in a car and first to
run a 1/4 in one!!

Is your data backed up?? one extra month free for all Turbo minis members, PM me for detials


Vegard

User Avatar

7765 Posts
Member #: 74
I pick holes in everything..

Chief ancient post excavator

Norway

Jim. Was the car in similar spec from 187 V-max bananas to 130 Emerald bananas?

If so, was the V-max setup not optimal?

On 13th Jul, 2012 Ben H said:
Mine gets in the way a bit, but only when it is up. If it is down it does not cause a problem.



Jimster
Site Admin

User Avatar

9407 Posts
Member #: 58
455bhp per ton
12 sec 1/4 mile road legal mini

Sunny Bridgend, South Wales

The car had not changed at all between the time it left v-max and went to emerald. All Dave walker did in emerald was tweak the ingnition, mainly dialed out some of the boost retard

Team Racing

On 15th May, 2009 TurboDave said:

I think the welsh one has it right!


1st to provide running proof
of turbo twinkie in a car and first to
run a 1/4 in one!!

Is your data backed up?? one extra month free for all Turbo minis members, PM me for detials


Miniwilliams

User Avatar

5329 Posts
Member #: 140
Proven 200+bhp & Avon Park 05,06,07 Class D 3rd place

Nic I want an egg :(


i won't be going to www.mberaceengines.co.uk again. either.

Best 1/4 mile 13.2 seconds @116 mph
First 5 port miniturbo to make over 200 bhp on a carb?
First 5 port miniturbo to make over 200 bhp on Injection?

http://www.mattwoodsphotography.com


dan
Forum Mod

1140 Posts
Member #: 93
Post Whore

Near Lincoln

On 20/09/2005 13:09:06 Miniwilliams said:


i won't be going to www.mberaceengines.co.uk again. either.



?


iain
Site Admin

User Avatar

8506 Posts
Member #: 16
Sold the turbo and seeing what the C20XE can do!

Near Lincoln

I thought that..

Mike's rollers aren't the best by a long way but he knows how to set up an a series for sure on them *smiley*


Miniwilliams

User Avatar

5329 Posts
Member #: 140
Proven 200+bhp & Avon Park 05,06,07 Class D 3rd place

Yes, he seems a top bloke I just don't like the rollers that hold the engine back hard to measure power.

I was on High boost flat to the boards and the can stayed at 6000 rpm I could hear it staining, not sore me I was afraid of braking some thing.

Can't we go same where different and more kind on the engine/gearboxes ect??

Best 1/4 mile 13.2 seconds @116 mph
First 5 port miniturbo to make over 200 bhp on a carb?
First 5 port miniturbo to make over 200 bhp on Injection?

http://www.mattwoodsphotography.com


Miniwilliams

User Avatar

5329 Posts
Member #: 140
Proven 200+bhp & Avon Park 05,06,07 Class D 3rd place

On 20/09/2005 13:11:59 iain said:

I thought that..

Mike's rollers aren't the best by a long way but he knows how to set up an a series for sure on them *smiley*


If it's a rolling road day you don't have time to set the cars up so why does he need to be good in setting them up?


I'll contact Mini Mag for you if you like to get a feature.

Best 1/4 mile 13.2 seconds @116 mph
First 5 port miniturbo to make over 200 bhp on a carb?
First 5 port miniturbo to make over 200 bhp on Injection?

http://www.mattwoodsphotography.com


dan
Forum Mod

1140 Posts
Member #: 93
Post Whore

Near Lincoln

fair comments matt, it would be alot better if he had his own rollers that were more upto date perhaps, i think the brake is pretty old, should be seeing him tomorrow so i'll see what he says, the ones being used on the rr day belong to the unit they were in


Vegard

User Avatar

7765 Posts
Member #: 74
I pick holes in everything..

Chief ancient post excavator

Norway

Hmm That's strange.

On 13th Jul, 2012 Ben H said:
Mine gets in the way a bit, but only when it is up. If it is down it does not cause a problem.



Miniwilliams

User Avatar

5329 Posts
Member #: 140
Proven 200+bhp & Avon Park 05,06,07 Class D 3rd place

Hmm That's strange. what is mate??

Best 1/4 mile 13.2 seconds @116 mph
First 5 port miniturbo to make over 200 bhp on a carb?
First 5 port miniturbo to make over 200 bhp on Injection?

http://www.mattwoodsphotography.com


iain
Site Admin

User Avatar

8506 Posts
Member #: 16
Sold the turbo and seeing what the C20XE can do!

Near Lincoln

We're not thinking of using mike this time anyway matt *happy*

Either sleaford or possibly morspeed if its up and running *smiley*

I wasn't on about setting up on the day, just for people reading this post local to lincoln for somewhere to get set up.

A feature sounds good but i guess we need to know where.

I'll have a word with simon tomorrow night when i go to see him and see if his rollers are likely to be done for easter.


Miniwilliams

User Avatar

5329 Posts
Member #: 140
Proven 200+bhp & Avon Park 05,06,07 Class D 3rd place

I can't see why we can't got to colchester in essex*wink*

Best 1/4 mile 13.2 seconds @116 mph
First 5 port miniturbo to make over 200 bhp on a carb?
First 5 port miniturbo to make over 200 bhp on Injection?

http://www.mattwoodsphotography.com


Vegard

User Avatar

7765 Posts
Member #: 74
I pick holes in everything..

Chief ancient post excavator

Norway

On 20/09/2005 13:28:32 Miniwilliams said:

Hmm That's strange. what is mate??


I find the difference setting up the engine between these RR operators disturbing.

On 20/09/2005 12:30:59 Jimster said:

The car had not changed at all between the time it left v-max and went to emerald. All Dave walker did in emerald was tweak the ingnition, mainly dialed out some of the boost retard


I didn't see page two :)

Edited by Vegard on 20th Sep, 2005.

On 13th Jul, 2012 Ben H said:
Mine gets in the way a bit, but only when it is up. If it is down it does not cause a problem.



iain
Site Admin

User Avatar

8506 Posts
Member #: 16
Sold the turbo and seeing what the C20XE can do!

Near Lincoln

leicester is fairly central i guess though?

End of the day its down to the guys who want to come to it *smiley*

We'll start a thread end of this week to gauge interest and get an idea of where to hold it etc


Nic

User Avatar

9326 Posts
Member #: 59
First mini turbo to get in the 12's & site perv

Herefordshire

cant we do cheltenham again? thats close to me and a great drive


turbodave16v
Forum Mod

10980 Posts
Member #: 17
***16***

SouthPark, Colorado

On 20/09/2005 13:34:24 Miniwilliams said:

I can't see why we can't got to colchester in essex*wink*


Maybe because that's hundreds of miles from the majority of folks!*laughing*

On 17th Nov, 2014 Tom Fenton said:
Sorry to say My Herpes are no better


Ready to feel Ancient ??? This is 26 years old as of 2022 https://youtu.be/YQQokcoOzeY



Jimster
Site Admin

User Avatar

9407 Posts
Member #: 58
455bhp per ton
12 sec 1/4 mile road legal mini

Sunny Bridgend, South Wales

it's great for me! :)

Team Racing

On 15th May, 2009 TurboDave said:

I think the welsh one has it right!


1st to provide running proof
of turbo twinkie in a car and first to
run a 1/4 in one!!

Is your data backed up?? one extra month free for all Turbo minis members, PM me for detials


Miniwilliams

User Avatar

5329 Posts
Member #: 140
Proven 200+bhp & Avon Park 05,06,07 Class D 3rd place

Yes Dave but EVERY where else is bloody miles form me!

Best 1/4 mile 13.2 seconds @116 mph
First 5 port miniturbo to make over 200 bhp on a carb?
First 5 port miniturbo to make over 200 bhp on Injection?

http://www.mattwoodsphotography.com


turbodave16v
Forum Mod

10980 Posts
Member #: 17
***16***

SouthPark, Colorado

Oh listen to you!

I've got even further to travel!

On 17th Nov, 2014 Tom Fenton said:
Sorry to say My Herpes are no better


Ready to feel Ancient ??? This is 26 years old as of 2022 https://youtu.be/YQQokcoOzeY


Home > General Chat > rolling road.
Users viewing this thread: none. (+ 1 Guests) <- Prev   Next ->
To post messages you must be logged in!
Username: Password:
Page: