| Page: |
| Home > General Chat > Intercoolers ---------S60 Volvo | |||||||
 169 Posts Member #: 409 Advanced Member Bristol |
8th Dec, 2005 at 05:41:32pm
That is mahoosive!
Edited by Choppo on 8th Dec, 2005. Hannibal: There are two ways we can do this: the easy way and the hard way. In a few minutes my friends and I are going to come down on you like your worst nightmare. You're gonna wish the Earth had opened up and swallowed you whole.
|
||||||
 3184 Posts Member #: 628 Post Whore a LIL fishing village on the coast - Newcastle Upon Tyne |
8th Dec, 2005 at 08:15:47pm
Tom hav not put it next to the car as yet, this one is on ebay, the one i saw at work looked much smaller, i will have to check that they 8nt changed the cooler when the new mk s 60 came out this one would be overkill i suppose
On 17th Aug, 2009 Jay#2 said:
I doubt I'll be dipping into the 13's like you did though! |
||||||
|
3184 Posts Member #: 628 Post Whore a LIL fishing village on the coast - Newcastle Upon Tyne |
9th Dec, 2005 at 07:32:22am
ok i looked at the ones on the cars and they are exactly the same bloody huge (but thin) i have saddly made a cardboard template, using the dimensions above and the cooler will literally just fit, it will however take up all the front space from subframe to bonnet top.
On 17th Aug, 2009 Jay#2 said:
I doubt I'll be dipping into the 13's like you did though! |
||||||
|
Site Admin  15300 Posts Member #: 337 Fearless Tom Fenton, Avon Park 2007 & 2008 class D winner & TM legend. |
9th Dec, 2005 at 08:06:47am
Will the dizzy even fit if you have an intercooler across the front of the front panel? I know that on my car it certainly wouldn't, I have a dizzy in there for now that I have used to get the engine started and running, until I install the mapped ignition.
On 29th Nov, 2016 madmk1 said:
On 28th Nov, 2016 Rob Gavin said:
I refuse to pay for anything else Like fuel 😂😂 |
||||||
 9258 Posts Member #: 123 Post Whore Betwix Harrogate and York |
9th Dec, 2005 at 08:15:42am
I was one on my way home from work about 2 in the morning when a police car passed me in the opposite direction. looking in my mirrors I saw him turning round and following me. Bugger this I thought, I want to get home to bed. He was quite a way behind me still and I reckon he couldn't have had my plate.
Fastest 998 mini in the world? 13.05 1/4 mile 106mph
On 2nd Jan, 2013 fastcarl said:
the design shows a distinct lack of imagination, talk about starting off with a clean sheet of paper, then not bothering to fucking draw on it,lol On 20th Apr, 2012 Paul S said:
I'm mainly concerned about swirl in the runners caused by the tangential entry. |
||||||
|
Site Admin 15300 Posts Member #: 337 Fearless Tom Fenton, Avon Park 2007 & 2008 class D winner & TM legend. |
9th Dec, 2005 at 08:30:40am
Looking at that picture again though, if you can get hold of these coolers cheap/free, it would be possible to un-pick the end tanks, and then cut the coolers in half ("cross" ways) and make two or maybe three coolers from one, and then fabricate suitable end tanks....
On 29th Nov, 2016 madmk1 said:
On 28th Nov, 2016 Rob Gavin said:
I refuse to pay for anything else Like fuel 😂😂 |
||||||
|
3184 Posts Member #: 628 Post Whore a LIL fishing village on the coast - Newcastle Upon Tyne |
9th Dec, 2005 at 09:16:25am
hmm never thought of it to be honest... iam sure the dizzy will still fit, it will be tight but it will fit..... as for the cutting down, could be an idea !
On 17th Aug, 2009 Jay#2 said:
I doubt I'll be dipping into the 13's like you did though! |
||||||
|
241 Posts Member #: 595 Senior Member stoke on trent |
9th Dec, 2005 at 11:21:24am
loving that statement will
|
||||||
 7765 Posts Member #: 74 I pick holes in everything.. Chief ancient post excavator |
9th Dec, 2005 at 12:17:37pm
On 09/12/2005 08:30:40 Tom Fenton said:
Looking at that picture again though, if you can get hold of these coolers cheap/free, it would be possible to un-pick the end tanks, and then cut the coolers in half ("cross" ways) and make two or maybe three coolers from one, and then fabricate suitable end tanks.... What about fitting them in serial with 10cm between. Then the Dizzy might poke out in the middle :) Sounds like a plan :) On 13th Jul, 2012 Ben H said:
Mine gets in the way a bit, but only when it is up. If it is down it does not cause a problem. |
||||||
|
9258 Posts Member #: 123 Post Whore Betwix Harrogate and York |
9th Dec, 2005 at 03:11:08pm
My intercooler used to fit in front of the dizzy (when I had a dizzy) had about 5mm clearance.
Fastest 998 mini in the world? 13.05 1/4 mile 106mph
On 2nd Jan, 2013 fastcarl said:
the design shows a distinct lack of imagination, talk about starting off with a clean sheet of paper, then not bothering to fucking draw on it,lol On 20th Apr, 2012 Paul S said:
I'm mainly concerned about swirl in the runners caused by the tangential entry. |
||||||
|
241 Posts Member #: 595 Senior Member stoke on trent |
9th Dec, 2005 at 03:49:15pm
do u drive a mini on the round will. r u goin cum in work for a chat 1 day
|
||||||
| Home > General Chat > Intercoolers ---------S60 Volvo | |||||||
|
|||||||
| Page: |