| Page: |
| Home > General Chat > Harness Mounting - Possible Not on Bar or Rear Bulkhead ? | |||||||
 481 Posts Member #: 7893 Senior Member Portsmouth |
29th Feb, 2012 at 05:20:45pm
On 29th Feb, 2012 RidingLow said:
Worked how to fit them yet :)? Not yet :) I am just making things awkward for myself haha..... On 29th Feb, 2012 RidingLow said:
Oh try this site :) http://www.rallynuts.com/installation-hardware.html Nice one with the link bud, Minisport seem to be making some nice proffit on those bits :$ Edited by Wile E. Coyote on 29th Feb, 2012. My 79 Clubman Build Thread - http://www.turbominis.co.uk/forums/index.php?p=vt&tid=451008
|
||||||
|
1909 Posts Member #: 9764 Post Whore Northamptonshire. |
29th Feb, 2012 at 05:25:28pm
yeah what i thought!! minisport do good though never let me down -touch wood- |
||||||
|
96 Posts Member #: 9387 Advanced Member Sleaford, Lincolnshire |
29th Feb, 2012 at 06:07:02pm
Using the standard rear seat mounts at the base of the rear seat area puts the mounting points a bit low really. They are still within the required angle but in my opinion they are just a bit too low which was why I originally came up with the harness bar that sits at the top of the wheel arch getting the harness at a much better angle. Bolting some eyebolts through the rear parcel shelf, even with spreader plates isnt really ideal as the area was never meant to take that loading. www.jb-fab.com www.facebook.com/jbfabrication
|
||||||
|
96 Posts Member #: 9387 Advanced Member Sleaford, Lincolnshire |
29th Feb, 2012 at 06:09:59pm
On 29th Feb, 2012 wil_h said:
I like your thinking Matt. My two thoughts are: 1) run it as close to the parcle shelf as possible and just behind where the seat fits. It needs no more space than the 2mm thickness of the webbing. 2) use a smaller tube. That looks like standard roll cage CDS, I reckon you could go a lot smaller. Sorry about the wank comment, but it is not asthetically pleasing as it is, but you know that. Not a problem mate, never been bothered about critisism in whatever form it comes as it normally leads to better ideas :) I use 32mm CDS which is about as small as I would go really and is a bit smaller than regular cage tube. Does sit lower and further back now, will get a new picture posted as soon as I have one made up www.jb-fab.com www.facebook.com/jbfabrication
|
||||||
| Home > General Chat > Harness Mounting - Possible Not on Bar or Rear Bulkhead ? | |||||||
|
|||||||
| Page: |