valve size and material
Turbo Mini Forums

what is the safest and largest size valves to go for, i am not after stupid size, and do you need stainless valves for both exhaust and inlet i guess so

"Can I legally marry people now that I am ordained in the Church of the SubGenius?" aka i know jack sh"t

i also make things

i love coming home to chrome

whats the awnser then benross for a 1275 high boost head

"Can I legally marry people now that I am ordained in the Church of the SubGenius?" aka i know jack sh"t

i also make things

i love coming home to chrome

depend of which cam you are planing to use,
if you're going for a speciel a seri turbo cam,( ph2, but also 274) go for larger mg n/a inlet and std turbo exh (ie 35.6/29.6).
then you can try a good n/a cam, and use 33 inlet with 31 exhaust, it will work very well!
fab

I had 36x 31 Stainless wasted stem vlaves, ran with no prob's at all on a 1293. My brother has 36x32, again wasted stems, but offset. Very snazzy!

Hannibal: There are two ways we can do this: the easy way and the hard way. In a few minutes my friends and I are going to come down on you like your worst nightmare. You're gonna wish the Earth had opened up and swallowed you whole.
bad guy: What's the easy way?
Hannibal: That WAS the easy way.