setting up suspension!?
Turbo Mini Forums

hi

iv just fited a set of adjustable heavy duty tie rods from minisapres.
iv set them so there the same length as the standerd ones if just taken off (they are bent).
now when i go right it feels ok (a bit heavy maybe) but when i go left it feels to light!
when i brake it trys to go left!!
i need to sort it out but im not sure how.
would i be better off fitting negative cambre hi los adjustable shockes etc then taking it somewere to set it all up or just try setting it up one at a time?
do you know any were that will set them up well in my area? (im in north hertfordshire/bedfordshire area.

cheers
josh

My build thread..

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=542985

Make sure that your tie bars are set equally for a start.

You have a PM

On 5th Sep, 2011 Vegard said:
I stand corrected. You should know

yer i was very carfull to make sure there both equal, but thinking about it it was doing it a bit before i fitted them its just that now the proplem is now exadurated (sp??)
ill get it all sorted by a proffesonal at some point

My build thread..

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=542985

has any one used the evolution AGX adjustable dampers from mini spares?
they sound good but was wondering if anyone else has tried them?
are they any good?
would you recomend them?

cheers
josh

My build thread..

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=542985

i would use the kayaba gas adjusts, heard really good feedback from them and KD has them on his sportspack.

yes i've just chucked them on mine, with the 1.5 neg camber arms, so i guess mine need setting up to.

Best 1/4 mile 13.2 seconds @116 mph
First 5 port miniturbo to make over 200 bhp on a carb?
First 5 port miniturbo to make over 200 bhp on Injection?

http://www.mattwoodsphotography.com