| Page: |
| Home > For Sale > SWAP - my MG n/a cam for any old piece of junk cam!!! | |||||||
|
1425 Posts Member #: 690 Post Whore Norfolk |
17th Sep, 2006 at 08:21:20pm
As the MG cam is used a lot in turbo motors - I'm proposing to swap an MG n/a cam I have for a "normal" A+ cam. Basically I'm building another K headed motor and don't want to turn the lobes off a cam one of you guys could use - the only other cams I have around are performance na cams and I don't want to turn the lobes off these either.
If Carling made Mini engines
|
||||||
|
Site Admin  15300 Posts Member #: 337 Fearless Tom Fenton, Avon Park 2007 & 2008 class D winner & TM legend. |
17th Sep, 2006 at 08:24:06pm
John, PM sent
On 29th Nov, 2016 madmk1 said:
On 28th Nov, 2016 Rob Gavin said:
I refuse to pay for anything else Like fuel 😂😂 |
||||||
|
Forum Mod 10980 Posts Member #: 17 ***16*** SouthPark, Colorado |
17th Sep, 2006 at 08:33:49pm
What a great offer.
On 17th Nov, 2014 Tom Fenton said:
Sorry to say My Herpes are no better Ready to feel Ancient ??? This is 26 years old as of 2022 https://youtu.be/YQQokcoOzeY |
||||||
 11046 Posts Member #: 965 Post Whore Preston On The Brook |
17th Sep, 2006 at 10:39:28pm
Bugger two hours too late, Been after an MG cam for yonks Edited by Sprocket on 17th Sep, 2006. On 26th Oct, 2004 TurboDave16v said:
Is it A-Series only? I think it should be... So when some joey comes on here about how his 16v turbo vauxhall is great compared to ours, he can be given the 'bird'... On 26th Oct, 2004 Tom Fenton said:
Yep I agree with TD........ |
||||||
|
Site Admin  9407 Posts Member #: 58 455bhp per ton 12 sec 1/4 mile road legal mini Sunny Bridgend, South Wales |
18th Sep, 2006 at 08:58:28am
I did this also jon, People who came into the workshop could not believe there eyes when I started doing this
Edited by Jimster on 18th Sep, 2006. On 15th May, 2009 TurboDave said:
I think the welsh one has it right! 1st to provide running proof of turbo twinkie in a car and first to run a 1/4 in one!! Is your data backed up?? one extra month free for all Turbo minis members, PM me for detials |
||||||
 8604 Posts Member #: 573 Formerly Axel Podland |
18th Sep, 2006 at 10:54:44am
So it's not a "Tri-Cam" motor! LOL. Saul Bellow - "A great deal of intelligence can be invested in ignorance when the need for illusion is deep."
|
||||||
|
Site Admin 9407 Posts Member #: 58 455bhp per ton 12 sec 1/4 mile road legal mini Sunny Bridgend, South Wales |
18th Sep, 2006 at 11:08:30am
well it is, but one of the cams is a very long duration, about 360 degrees On 15th May, 2009 TurboDave said:
I think the welsh one has it right! 1st to provide running proof of turbo twinkie in a car and first to run a 1/4 in one!! Is your data backed up?? one extra month free for all Turbo minis members, PM me for detials |
||||||
|
Site Admin 15300 Posts Member #: 337 Fearless Tom Fenton, Avon Park 2007 & 2008 class D winner & TM legend. |
18th Sep, 2006 at 03:17:57pm
Just out of interest, how did you get on turning the lobes down jim, I would have thought they would be bloody hard and would not have taken kindly to being machined?
On 29th Nov, 2016 madmk1 said:
On 28th Nov, 2016 Rob Gavin said:
I refuse to pay for anything else Like fuel 😂😂 |
||||||
|
Site Admin 9407 Posts Member #: 58 455bhp per ton 12 sec 1/4 mile road legal mini Sunny Bridgend, South Wales |
18th Sep, 2006 at 04:18:42pm
yes, it was bloody hard, just took my time and took off a small amount at a time. On 15th May, 2009 TurboDave said:
I think the welsh one has it right! 1st to provide running proof of turbo twinkie in a car and first to run a 1/4 in one!! Is your data backed up?? one extra month free for all Turbo minis members, PM me for detials |
||||||
 6965 Posts Member #: 507 Fastest A Series Mini in the World leeds/wakefield. |
18th Sep, 2006 at 07:22:16pm
On 18/09/2006 16:18:42 Jimster said:
yes, it was bloody hard, just took my time and took off a small amount at a time. the cam i did as per ypours jim was not very hard at all, the lobes turned off no bother, the cam is softer than a follower, carl |
||||||
 1451 Posts Member #: 328 Post Whore Seaford Rise, South Australia |
18th Sep, 2006 at 07:55:18pm
I bought one from Kent Cams for £45 - sounds like a bargain for all the machining involved? On 5th Sep, 2011 Vegard said:
I stand corrected. You should know  |
||||||
|
1425 Posts Member #: 690 Post Whore Norfolk |
18th Sep, 2006 at 08:33:48pm
Sold / swapped to Tom
If Carling made Mini engines
|
||||||
|
Site Admin 9407 Posts Member #: 58 455bhp per ton 12 sec 1/4 mile road legal mini Sunny Bridgend, South Wales |
19th Sep, 2006 at 09:31:16am
On 18/09/2006 19:22:16 fastcarl said:
On 18/09/2006 16:18:42 Jimster said:
yes, it was bloody hard, just took my time and took off a small amount at a time. the cam i did as per ypours jim was not very hard at all, the lobes turned off no bother, the cam is softer than a follower, carl wasyour cam from newman cams carl? lol Edited by Jimster on 19th Sep, 2006. On 15th May, 2009 TurboDave said:
I think the welsh one has it right! 1st to provide running proof of turbo twinkie in a car and first to run a 1/4 in one!! Is your data backed up?? one extra month free for all Turbo minis members, PM me for detials |
||||||
| Home > For Sale > SWAP - my MG n/a cam for any old piece of junk cam!!! | |||||||
|
|||||||
| Page: |