| Page: |
| Home > Wanted > alloy fuel tank/race with a fuel sender | |||||||
 1840 Posts Member #: 54 Post Whore nr coventry |
20th Sep, 2006 at 04:13:39pm
alloy fuel tank/race cell with a fuel sender, must be 7gallon or more & have the appropriate feed & return for my turbo conversion, & breather pipe, it must also fit in my boot, must be cheap-ish, preferably in the midlands but can travel up to 75miles
SKYLINES ARE LIKE CLITS, EVERY FLANGE SEEMS TO HAVE ONE: see this sticker on my silvia
|
||||||
|
Site Admin  15302 Posts Member #: 337 Fearless Tom Fenton, Avon Park 2007 & 2008 class D winner & TM legend. |
20th Sep, 2006 at 04:33:16pm
Why not just use the standard tank?????
On 29th Nov, 2016 madmk1 said:
On 28th Nov, 2016 Rob Gavin said:
I refuse to pay for anything else Like fuel 😂😂 |
||||||
|
Site Admin  9407 Posts Member #: 58 455bhp per ton 12 sec 1/4 mile road legal mini Sunny Bridgend, South Wales |
20th Sep, 2006 at 04:34:37pm
www.owensfabrication.com can make anything you like. On 15th May, 2009 TurboDave said:
I think the welsh one has it right! 1st to provide running proof of turbo twinkie in a car and first to run a 1/4 in one!! Is your data backed up?? one extra month free for all Turbo minis members, PM me for detials |
||||||
|
1840 Posts Member #: 54 Post Whore nr coventry |
20th Sep, 2006 at 05:19:43pm
i want to mount the tank in a central position, preferably between the rear arches, but no taller than the shock mount tops, as these are going to be braced! the spare wheel well may be cut out & it made into a flat boot floor too, plus it makes life easier changing shocks, fuel pipes etc etc cheers guys any advice is apprieciated SKYLINES ARE LIKE CLITS, EVERY FLANGE SEEMS TO HAVE ONE: see this sticker on my silvia
|
||||||
|
1840 Posts Member #: 54 Post Whore nr coventry |
20th Sep, 2006 at 08:38:09pm
JIMSTER i was lookin at the tank in your yellow mini in the gallery section of owens fabrication
SKYLINES ARE LIKE CLITS, EVERY FLANGE SEEMS TO HAVE ONE: see this sticker on my silvia
|
||||||
 2521 Posts Member #: 417 Post Whore Swindon |
20th Sep, 2006 at 09:09:39pm
JIMSTER on the same thing I need a flange and screw on cap for a fuel cell
Edited by Dangerous on 20th Sep, 2006.
|
||||||
 282 Posts Member #: 616 Senior Member Birmingham |
20th Sep, 2006 at 10:19:09pm
http://search.ebay.co.uk/alloy-fuel-tank_W...ssPageNameZWLRS |
||||||
|
Site Admin 9407 Posts Member #: 58 455bhp per ton 12 sec 1/4 mile road legal mini Sunny Bridgend, South Wales |
21st Sep, 2006 at 09:16:31am
Dangerous, have you tried rally design?? That's where I get most of my bits from.
On 15th May, 2009 TurboDave said:
I think the welsh one has it right! 1st to provide running proof of turbo twinkie in a car and first to run a 1/4 in one!! Is your data backed up?? one extra month free for all Turbo minis members, PM me for detials |
||||||
| Home > Wanted > alloy fuel tank/race with a fuel sender | |||||||
|
|||||||
| Page: |