| Page: |
| Home > General Chat > Fitting a 30mm Dump Valve Pipe on a Metro Plenum Chamber | |||||||
|
4314 Posts Member #: 700 Formerly British Open Classic The West Country |
23rd Sep, 2006 at 09:37:50pm
I've got the hang of fitting the more common 25mm dump valve pipes to plenum chambers, but due to changes in my choice of dump valve I could really do with a 30mm pipe coming off the plenum. From measuring the outside of the plenum there plenty of space but I've cut the wall thickness a bit fine a couple of times when drilling them for 25mm pipes. Therefore before I drill another plenum with a bigger drill I was wandering if anyone has tried this before? Isambard Kingdom Brunel said:
Nothing is impossible if you are an Engineer |
||||||
|
Site Admin  15300 Posts Member #: 337 Fearless Tom Fenton, Avon Park 2007 & 2008 class D winner & TM legend. |
24th Sep, 2006 at 06:12:18am
Leave your 25mm pipe as it is and get a 25-30mm silicone hose to attach to valve?
On 29th Nov, 2016 madmk1 said:
On 28th Nov, 2016 Rob Gavin said:
I refuse to pay for anything else Like fuel 😂😂 |
||||||
 1566 Posts Member #: 36 Post Whore Basingstoke |
24th Sep, 2006 at 09:39:00am
or put a t-piece in the boost pipe as close to the plenum as you can, assuming you are running an intercooler. |
||||||
| Home > General Chat > Fitting a 30mm Dump Valve Pipe on a Metro Plenum Chamber | |||||||
|
|||||||
| Page: |