| Page: |
| Home > General Chat > Latest rolling road results from MW and myself. | |||||||
 1666 Posts Member #: 252 Post Whore Sunny suffolk |
2nd Oct, 2006 at 05:19:19pm
Well i was very pleased with 181bhp running 15psi, the plan was to run 16psi but could not bleed off any more air with my simple little bleed valve set-up but still very pleased.
-MINI CLUBMAN 1380 TURBO- |
||||||
 12307 Posts Member #: 565 Carlos Fandango Burnham-on-Crouch, Essex |
2nd Oct, 2006 at 05:21:39pm
On 28th Aug, 2011 Kean said:
At the risk of being sigged... Joe, do you have a photo of your tool? http://www.turbominis.co.uk/forums/index.p...9064&lastpost=1 https://joe1977.imgbb.com/ |
||||||
|
3594 Posts Member #: 655 Post Whore Northern Ireland |
2nd Oct, 2006 at 05:22:47pm
On 2nd of Oct at 05:19pm T3Tone said:
could not bleed off any more air with my simple little bleed valve Whilst Im no longer a fan of bleed valves..... Try rstricting the feed line into the bleed valve from the compressor. The valve then has less air to deal with. This may allow you to up the boost a bit. It may also make it a little more sensitive to adjustments though. Takes a bit of experimenting. 9.85 @ 145mph
|
||||||
|
3594 Posts Member #: 655 Post Whore Northern Ireland |
2nd Oct, 2006 at 05:26:30pm
On 2nd of Oct at 05:21pm mini13 said:
 Surely thats a typo!!RR figures are often only useful in the pub..... Some read high, some read low, some may even read close to true...not very often though. 9.85 @ 145mph
|
||||||
|
Forum Mod 10980 Posts Member #: 17 ***16*** SouthPark, Colorado |
2nd Oct, 2006 at 05:31:40pm
Well I think that slipping a double-grey diaphram is a world first - and is enough proof in the proverbial pudding of the torque output...
On 17th Nov, 2014 Tom Fenton said:
Sorry to say My Herpes are no better Ready to feel Ancient ??? This is 26 years old as of 2022 https://youtu.be/YQQokcoOzeY |
||||||
|
12307 Posts Member #: 565 Carlos Fandango Burnham-on-Crouch, Essex |
2nd Oct, 2006 at 05:34:35pm
yeah but 284..... with a slipping clutch, thats a bit high isn't it! On 28th Aug, 2011 Kean said:
At the risk of being sigged... Joe, do you have a photo of your tool? http://www.turbominis.co.uk/forums/index.p...9064&lastpost=1 https://joe1977.imgbb.com/ |
||||||
|
Site Admin  9407 Posts Member #: 58 455bhp per ton 12 sec 1/4 mile road legal mini Sunny Bridgend, South Wales |
2nd Oct, 2006 at 05:46:34pm
very impressed well done matt!
On 15th May, 2009 TurboDave said:
I think the welsh one has it right! 1st to provide running proof of turbo twinkie in a car and first to run a 1/4 in one!! Is your data backed up?? one extra month free for all Turbo minis members, PM me for detials |
||||||
|
1666 Posts Member #: 252 Post Whore Sunny suffolk |
2nd Oct, 2006 at 05:51:31pm
Yes dave it was a mixture of bmw and classics at t & m colchester. Always get very acurate/genuine figures from these rollers, every standard car we know that goes on there gets very close to there surposed output.
-MINI CLUBMAN 1380 TURBO- |
||||||
|
12307 Posts Member #: 565 Carlos Fandango Burnham-on-Crouch, Essex |
2nd Oct, 2006 at 05:56:43pm
bloody hell!!
Edited by Joe C on 2nd Oct, 2006. On 28th Aug, 2011 Kean said:
At the risk of being sigged... Joe, do you have a photo of your tool? http://www.turbominis.co.uk/forums/index.p...9064&lastpost=1 https://joe1977.imgbb.com/ |
||||||
|
Site Admin 9407 Posts Member #: 58 455bhp per ton 12 sec 1/4 mile road legal mini Sunny Bridgend, South Wales |
2nd Oct, 2006 at 05:56:53pm
181 @ 15 psi, well done! what ever your doing, your doing it right!! On 15th May, 2009 TurboDave said:
I think the welsh one has it right! 1st to provide running proof of turbo twinkie in a car and first to run a 1/4 in one!! Is your data backed up?? one extra month free for all Turbo minis members, PM me for detials |
||||||
 2924 Posts Member #: 95 Post Whore liverpool-on-sea |
2nd Oct, 2006 at 06:29:11pm
well done guys. but 284.5 bananas holy crap!! no longer a series, but still 1.3 turbo.
On 28th Nov, 2008 Sprocket said:
Oh now that is a long shaft you have Carl. |
||||||
 2742 Posts Member #: 637 Post Whore Hertfordshire |
2nd Oct, 2006 at 07:06:26pm
now i bet that is a bit of a handfull, both of them for that matter!!
My build thread..
|
||||||
 8297 Posts Member #: 408 Turbo Love Palace Fool Aylesbury |
3rd Oct, 2006 at 01:11:07pm
Thats crazy!! Thats pretty much 3 times the standard output!
https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel
|
||||||
 1566 Posts Member #: 36 Post Whore Basingstoke |
3rd Oct, 2006 at 01:43:26pm
That's pretty crazy... |
||||||
|
Site Admin  6293 Posts Member #: 1 The boring bloke who runs this place. Berkshire |
3rd Oct, 2006 at 02:10:25pm
Awesome. |
||||||
 7765 Posts Member #: 74 I pick holes in everything.. Chief ancient post excavator |
3rd Oct, 2006 at 02:10:35pm
Holy crap! Now, try getting that into the ground :) On 13th Jul, 2012 Ben H said:
Mine gets in the way a bit, but only when it is up. If it is down it does not cause a problem. |
||||||
 5329 Posts Member #: 140 Proven 200+bhp & Avon Park 05,06,07 Class D 3rd place |
3rd Oct, 2006 at 09:50:44pm
The rollers were on the different setting for my run thats why it read that much.
Edited by Miniwilliams on 3rd Oct, 2006. Best 1/4 mile 13.2 seconds @116 mph
|
||||||
 9812 Posts Member #: 332 Resident Cylinder Head Modifier Mitsi Evo 7, 911, Cossie. & all the chavs ...... won no problem |
3rd Oct, 2006 at 10:16:28pm
torque figures if possible chaps
|
||||||
|
5329 Posts Member #: 140 Proven 200+bhp & Avon Park 05,06,07 Class D 3rd place |
3rd Oct, 2006 at 10:18:37pm
can't mate that rolling road doesn't do them. I guess i could work it out with the 5250 maths calc. Edited by Miniwilliams on 3rd Oct, 2006. Best 1/4 mile 13.2 seconds @116 mph
|
||||||
 9326 Posts Member #: 59 First mini turbo to get in the 12's & site perv Herefordshire |
3rd Oct, 2006 at 11:38:56pm
chuffing nora!! good work guys |
||||||
|
Site Admin 9407 Posts Member #: 58 455bhp per ton 12 sec 1/4 mile road legal mini Sunny Bridgend, South Wales |
4th Oct, 2006 at 08:47:31am
matt, how much gas is that using On 15th May, 2009 TurboDave said:
I think the welsh one has it right! 1st to provide running proof of turbo twinkie in a car and first to run a 1/4 in one!! Is your data backed up?? one extra month free for all Turbo minis members, PM me for detials |
||||||
|
5329 Posts Member #: 140 Proven 200+bhp & Avon Park 05,06,07 Class D 3rd place |
4th Oct, 2006 at 08:50:23am
same as last time jim i haven't changed the amount. Best 1/4 mile 13.2 seconds @116 mph
|
||||||
|
271 Posts Member #: 653 Advanced Member Cambs |
5th Oct, 2006 at 10:29:48pm
Not far off 300 there dude.............. Its only a bit of metal. If it blows it blows!
|
||||||
|
5795 Posts Member #: 80 AFRacing LTD Newbury, Berks |
6th Oct, 2006 at 11:08:33am
your rollers only measure torque and then calculate BHP....
AlexF |
||||||
|
1641 Posts Member #: 178 Post Whore stowmaket suffolk |
6th Oct, 2006 at 03:34:31pm
well done mate pity i couldnt make it as i was been cooked to 300 deg c in a flash over back draught trainer.
always looking for them bigger bunches of bannanas |
||||||
| Home > General Chat > Latest rolling road results from MW and myself. | |||||||
|
|||||||
I need another go in that car!| Page: |