ride height
Turbo Mini Forums

roughly what ride height are people running with 10 inch wheels and untubbed arches and do you have rubbing problems on the track

no longer a series, but still 1.3 turbo.

My front high lows are bottomed out comlpetely, though front arches have been modifies for 13's but i run 10's.

The rear is lowered to make it level or maybe just a tad high (5-10mm)!

Haven't taken it on a track yet but it has had some serious abuse round corners and only scrubs a little!

Oh yea and im running G-max shocks (pretty W@nk really)

https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel

www.fusionfabs.co.uk



1/4mile in 13.2sec @ 111 terminal on 15psi

my fronts are almost bottomed out.
i used to have rubbing proplems at standerd hight!!
untill i adjusted them with a angle grinder!!
the rears are about 10mm higher than the fronts other wise the steering goes all light and horrible!
i carnt go much lower with my rears as they start to rub on the inside of the arch and the only thing i could do to slove it is to use wheel spacers which i dont want to do as i already have cooper drums with the built in spacer.
thats with 10x6" wheels

My build thread..

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=542985

.

Edited by Bodge Job on 31st Mar, 2007.

No I needed to cut the arches anyway as the edge had started to rust, iv'e always had 10's fitted I just made it possible to fit 13's at a later date.

Thats never gonna happen as i love the look of 10's.

For some reason my pic won't load :(

Edited by matty on 4th Oct, 2006.

https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel

www.fusionfabs.co.uk



1/4mile in 13.2sec @ 111 terminal on 15psi

.

Edited by Bodge Job on 31st Mar, 2007.

File was too large oops!:$

Edited by matty on 5th Oct, 2006.

https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel

www.fusionfabs.co.uk



1/4mile in 13.2sec @ 111 terminal on 15psi

.

Edited by Bodge Job on 31st Mar, 2007.