Billet fuel rail stuff
Turbo Mini Forums

Hi all,

I need a bit of that billet fuel rail stuff, the only pace i've found it so far is Demon theives.

http://www.demon-tweeks.co.uk/products/Pro...&pcode=PSI14107

rather than give them my money can any one recomend a supplier for some, or maybe even have a spare length they want to flog?

I need a 350mm length minimum.

Cheers,

Joe.

A billet fuel rail sounds silly! Why not get a pipe?

ebay USA...

I think mine came from 'ross performance' - I might be totally wrong though!!!

Actually - I might have enough spare for you. Let me check tonight.

Edited by turbodave16v on 24th Oct, 2006.

I could use a bit of pipe and turn up some injector fittings and weld them on, but the billet ( actually I think theyre extruded) will be easier, and i don't trust myself tigging small stuff yet.

I was going to use a cut and lengthened 2 litre vauxhal fuel rail, but the reg hit the bonnet.

Cheers Dave that'll be great if you do have some.

Joe.

would a lenght of alloy hex bar do, i can put a hole down it,and a thread in the end if needed.

carl

WWW.FORCE-RACING.CO.UK PLEASE CLICK HERE

Good shout on the Ross website Dave,

http://www.rossmachineracing.com/dash6.html

Some good shit on there, could have saved me making 4 bits 40mm ID 50mm OD 3" long tube.... from 2" solid, oh well I had it spare.

Carl A bit of rectangle with an offset hole would do the trick, dunno what size hole is needed though, tapping size for dash 6 whatever size that is. I'd have a go myself ecept I don't have any drill bits that long.

a 10mm hole would be more than enough for a Mini fuel rail.
I think my old RV8 rail was about 1/2" OD tubing.

A Cossie fuel rail would obly be about 10mm ID, although its square section.

If you cant tap the ends, -6 etc weld fittings are readily available to weld onto any made up rails.

9.85 @ 145mph
202mph standing mile
speed didn't kill me, but taxation probably will

i'll have a look tomorrow and se if ive got any thing that will do, but i honestly doubt it ,

carl

WWW.FORCE-RACING.CO.UK PLEASE CLICK HERE

Joe, have a look at the standard Mi16 fuel rail.....

Good point, the reg on those points the other way,

Unfortunately I didn't get a fuel rail with the Mi16, also i think the reg will be where the plenum needs to be, plus the injector centres are 93mm on the mi16, I need 88,110,88.

Annoyingly, I can't find my rail.

Wonder If i've left it at my machinists.....

ait that sods law Dave LOL, Cheers for haveing a look though.

If I get some of the Ross rail shipped, anyone over here interested in some?

Edited by Joe C on 25th Oct, 2006.