just thought i would post my dyno sheet
Turbo Mini Forums

the Dyno operator said it was reading 10% down for what ever reason i dotn know, but i know i got 172BHP at 13psi on an engine dyno and i only got 107 at the wheels on this dyno. another mate got 202 (non mini motor) at the wheels 2 days before this dyno run and he only got 179 at the wheels on this one.

well here is is, all three runs was 107 and fuel looks good too.

179hp on 12psi 1293cc of pure A series
14.0et @101 mph

thanks Grant :)
I made a jump in aussimini board, and with the dyno day I saw a work bmw mini witch was 134 at wheels so it make a correction factor of about 1.55 for you wheel reading, could you tell me your diff ratio to extract rpm's (from what I saw you're using 175/50/13
best regards
fab

Whether the dyno is reading under or not, 172 nanas is more than enough.

Hats off to ya!

https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel

www.fusionfabs.co.uk



1/4mile in 13.2sec @ 111 terminal on 15psi

Hey Fab,

diff is 3.44, yeah 175/50x13, i am not 100% sure of the speedo to tacho readings, plus i do not have my license at the moment it has been suspended so i cant just go and jumo in it for you eiher.

Grant

179hp on 12psi 1293cc of pure A series
14.0et @101 mph

sure that's easy to loose the license with a 175 horses mini!
isn't the dyno speed right?
thanks
fab