Page:
Home > Wanted > 1st 2nd shift fork (likely pre A+ or possibly early A+)

turbodave16v
Forum Mod

10980 Posts
Member #: 17
***16***

SouthPark, Colorado

7th Nov, 2006 at 02:10:55am

I'm helping out a mini engine / trans builder over here:
He is stuck for 1st / 2nd forks in good shape; only problem is - they need to different to what most of us are probably familiar with...




These (above) are the forks that are not of interest; these are common A+ forks. Notice how the ends of the slots on the (as pictured) left-hand side of the forks are odd lengths - well he need the ones where the lengths are equal.

If you have one, you'll know what it is...

If you have a few, he'll probably have whatever you've got - so long as they're in good shape - ie the selector sleeve groove is around 0.455 / 0.458 wide. If they're worn any more than this, they aren't of interest...

Send me a PM, and I'll put you in touch with him. He did mention he has a few A+ ones that he is happy to swap with, but I guess the shipping could kill that LOL!
He will even consider brand-new, so long as he knows where he can get some from...

Cheers all :)

Edited by turbodave16v on 7th Nov, 2006.

On 17th Nov, 2014 Tom Fenton said:
Sorry to say My Herpes are no better


Ready to feel Ancient ??? This is 26 years old as of 2022 https://youtu.be/YQQokcoOzeY


Home > Wanted > 1st 2nd shift fork (likely pre A+ or possibly early A+)
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: