BulkHead Box
Turbo Mini Forums

Chaps
Done my bulkhead box
I found it really useful to see the pictures you guys gave me b4 I started it;
So for anyone else about to do it
I supply My picture !!!
Does it look ok to you lot ??
http://www.galaga.demon.co.uk/tm2.htm
S

TurboLessTosser

yours looks wicked !!
I have chopped more out of the passenger side cross beam though !
Not sure y I done that ; Hope it helps me in some way !!

I notice that you have plumbed your return from the fuel regulator back into the main fuel line.. Dont thinkk that is a good idea mate

You will need 2 run a new return back to the tank

I think the system is so finly balnced that by doing what you have done it could upset things a bit !

but then I am probably talking bollo !!!


Take care

Steve

TurboLessTosser

Hope your not using that fuel system for a turbo mate?

Just thought the facet pump wont be up to the job and the metro pump needs to be near the tank hence needing the return all the way back under the car.

Guys - I'd advise fabricating and WELDING in a suitable mount for the ultimate engine steady. No-one seems to ever do this, and then wonders how they can make something when it's all back together...

where do you advise putting the engine steady dave?

NO LONGER A <3 lover of BOLT-ON plastic <3 .... (and DOUBLE proud of it)

Basically make up a bracket as per ultimate head steady, its to replace this as the holes where they mount get chopped out.

Piece of angle with a hole in does the trick and welded along the top of the cross member.

link to some pics of my engine bay showing the steady bracket

link to some pics of my engine bay showing the steady bracket

I dont think my bulkhead box is right (already fitted when i got the car) if someone in the know could have a look at a couple of my pics and advise i would be really grateful.

I can have a look if i come over mate to cut bits out your shell