Page:
Home > General Chat > Plenum Chamber Bolts

Rob H

4314 Posts
Member #: 700
Formerly British Open Classic

The West Country

8th Dec, 2006 at 10:34:07pm

If I recall correctly there were a few posts about people having trouble sourcing plenum chamber bolts.

Well I've found an on-line supplier that sells 3" by 5/16" UNC bolts, mine arrived this morning and I'm pleased to say that they work just fine.

http://www.namrick.co.uk/product.asp?PID=289&PTTID=1&PCID=6

Isambard Kingdom Brunel said:
Nothing is impossible if you are an Engineer

iain
Site Admin

User Avatar

8506 Posts
Member #: 16
Sold the turbo and seeing what the C20XE can do!

Near Lincoln

8th Dec, 2006 at 10:57:33pm

I used bolts, nuts and washers with the holes drilled out *smiley*

Metric though!! *happy* Who's going to moan first?!? lol!

Dangerous

User Avatar

2521 Posts
Member #: 417
Post Whore

Swindon

8th Dec, 2006 at 11:03:32pm

Hey you shouldn't use metric stuff on you bored out 1275CC engine,with the M18 fine sparkplug threads.

Edit and the M6 bolts that hold the heat shield on

Edit again,And the HIF 44 (MM) carb

Edited by Dangerous on 8th Dec, 2006.


Metro turbo weekend driver,Mini turbo in the making again!



fab

User Avatar

1497 Posts
Member #: 100
Parisien Turbo Expert

Paris\' suburb

9th Dec, 2006 at 05:37:40am

diff housing studs/bolts


Stig

397 Posts
Member #: 694
Senior Member

Shropshire

9th Dec, 2006 at 04:36:43pm

Silly questionb but arte you refering to the bolts which pass through the Plenum Chamber and connect to the carb or the ones which connect the Plenum Chamber to the elephants trunk?

Rob H

4314 Posts
Member #: 700
Formerly British Open Classic

The West Country

9th Dec, 2006 at 04:42:19pm

These are the bolts that connect the plenum to the carb.

Isambard Kingdom Brunel said:
Nothing is impossible if you are an Engineer
Home > General Chat > Plenum Chamber Bolts
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: