4 pot calipers
Turbo Mini Forums

I'm sure that this has been asked before many times.

I have the complete metro turbo brake setup.

Is it possible to just fit the calipers and discs (along with a conversion kit - ) or is there something esle that is needed?

you need the ERA turbo calliper mounting bolts from minispares, and to use the vented drive flanges that are with the metro setup.

Are these the mounting bolts of which you speak ()?

So using these bolts, hoses and parts from the metro the brakes will fit the mini fine? And I do not need to use the metro hubs?

Do I need this kit as well ()?

http://www.minispares.com/Product.aspx?pid=35377

those are the ones you need.

you dont need the spacer kit, thats for the minispares alloy 4 pots.

you need:
callipers.
discs.
flanges.
ERA calliper bolts.
conversion hoses.

as above just make sure you have the small diameter drive flanges if you havent had them off the metro, link as below.

http://www.minispares.com/Product.aspx?pid=36942

And my Mini drive shafts will fit into those flanges fine?

Cheers for all the help guys

yep, mine were standard from the 1275, i use the minispares flanges and they fit great.

Great cheers for that. I will have a look at the condition of the metro flanges as I have the complete set up and car sitting around.