Brand Spanking New IHI RHB5 with flanges
Turbo Mini Forums

Offers please

IHI RHB5 Turbo specs found here http://www.rbracing-rsr.com/turbo/TurboMaps/IHI-chart6.gif And Here http://www.rbracing-rsr.com/turbo/TurboMaps/ihi_specs.gif

http://p200.ezboard.com/f750turbofrm6.show...picID=114.topic

Incidently I believe these to be the turbo chargers that RB Racing use on their BMW K kits?? This one I bought off a bloke who used them on his Hyabusa drag bike.

I think the turbine AR is 0.38. Its a small and compact unit and good for up to 210 right at the top.

I have looked at this and it should be able to fit at the back of the engine without the bulkhead box but with the engine mounted as per 92 onwards, IE, 12mm forward of the original 1959 position. Though it was initialy bought for the BMW K head mounting the turbo where the carb would normaly be.

The Actuator position needs adjusting, but its as I bought it two years ago, dry stored, in the house.

I think i have copper gaskets for this as well, some where

I have only in the last two weeks had the flanges lazer cut in 12mm 321 stainless for the inlet flange and 12mm 304 stainless for the outlet flange.

There is also up for grabs four BMW K head, header flanges in 8m 321 stainless

Edited by Sprocket on 3rd Mar, 2007.

Colin - pm sent

JK

If Carling made Mini engines
it would probably be like this one!

Sold!!