Page:
Home > Wanted > Wanted Brace Bars for Saloon

Doodles_Mcpooh

User Avatar

162 Posts
Member #: 1252
Advanced Member

Cornwall

15th Mar, 2007 at 12:46:17pm

After a set of brace bars if anyone has some for sale.

paneermeel

User Avatar

282 Posts
Member #: 1404
Senior Member

The Netherlands

15th Mar, 2007 at 12:57:27pm

make youre own...

a piece off steel, welled some tabs on them and bingo!!!!

saves you some money you can spend somewhere else *wink*

there is nothing wrong with a A-series that a turbo can't fix.

www.turbomini.nl


wil_h

User Avatar

9258 Posts
Member #: 123
Post Whore

Betwix Harrogate and York

15th Mar, 2007 at 01:42:12pm

for the sake of £30, just buy new.

http://www.minispares.com/Product.aspx?pid=36383

Fastest 998 mini in the world? 13.05 1/4 mile 106mph



On 2nd Jan, 2013 fastcarl said:
the design shows a distinct lack of imagination,
talk about starting off with a clean sheet of paper, then not bothering to fucking draw on it,lol

On 20th Apr, 2012 Paul S said:
I'm mainly concerned about swirl in the runners caused by the tangential entry.


RogerM

User Avatar

2514 Posts
Member #: 1217
I like nice quiet girly Minis

Cheltenham, Gloucestershire

15th Mar, 2007 at 07:37:31pm

If you had no material around you'd be looking at about £12 - £15 for the 1" sqr box section in a reasonable thickness and you'd have to spend another £10 or so on the material for the end tabs if you have to buy a length.

To be honest even with the material around I'd buy as the time to mark out etc if you've never made them before will be more than you'd have to spend at work to pay for a set.....

I'll probably make them for my car but then again I'm a tart and like everything to be a little unique in some way...

Every day is a school day ...........

How fast and how expensive ...... the same question...

On 27th of Sep, 2007 at 12:45pm Jimster said:
why do you you think I got a girlfriend with small hands?

Rob H

4314 Posts
Member #: 700
Formerly British Open Classic

The West Country

15th Mar, 2007 at 10:36:45pm

If you ask around a few fabricators you can get normally pick up the steel for beer money.

I'll probably be making a pair shortly, as I enjoy making things, especially if the welder is involved.

Out of interest are the off the shelf brace bars solid mounted or are there bushes in there (not sure how you'd fit bushes mind).

Isambard Kingdom Brunel said:
Nothing is impossible if you are an Engineer

Jason G

User Avatar

4360 Posts
Member #: 1459
En-suite user

Braintree, Essex

15th Mar, 2007 at 11:16:42pm

Problably get off cuts for nothing....beer is good for bartering.......

On 19th Jan, 2010 wil_h said:
I would start the furthest place from the finish.


On 24th Mar, 2012 apbellamy said:
I feel all special knowing that I've given your mum my wood.


Been neglecting Turbo'd 'A' series..............
Home > Wanted > Wanted Brace Bars for Saloon
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: