Bolt/Nut/Thread Sizes?
Turbo Mini Forums

I'm knocking up a spreadsheet to show sizes of bolts, nuts and washers that are used across the mini.

Current Fields are...

Location:
type:
Size:
Thread:
Length:
Qty Required:


can anyone contibute their knowledge?

sorry to dissapoint you anton but........................ its been done on the forum buddy but may be not to the specific lengths ect... you may want to go!

do a search and use this if you want to make a totally comprehensive list

would be very usefull for all

ahhh okies... i'll see if i can find it, i did have a quick look but obviously not enought :)

ahhh okies... i'll see if i can find it, i did have a quick look but obviously not enought :)

Any luck finding it Anton because I can't either!!!

I am happy to compile a list as I rebuild Candice's car ... can only help in the future!

Every day is a school day ...........

How fast and how expensive ...... the same question...

nope, found a few random ones on various posts but no proper lists.

i'm up ot 63 lines so far

While your at it,

would it be worth sticking in part no's and optional uprated bolts, for example stainless thrmostat stud's.

they go this far on MF a year or 2 back:

Timing Cover
5 x Bolts Cap Head 5/16"UNF (3/4" Long)
6 x Bolts Cap Head 1/4"UNF (7/16" Long)
5 x Washers 5/16"PLN (5/8" OD)
5 x Washers 5/16"SPR (1/2" OD)
6 x Washers 1/4"PLN (9/16" OD)
6 x Washers 1/4"SPR (7/16" OD)
1 x Nut 5/16"UNF (1/2" Head)
1 x Nut 1/4"UNF (7/16" Head)

Coolant Circui
2 x Bolts Heater Tap 1/4" UNF (7/16" Head, 1/2" Long)
2 x Washers Heater Tap 1/4" SPR (3/8" OD)
2 x Bolts Radiator Top 1/4" UNF (7/16" Head, 1 1/2" Long)
2 x Washers Radiator Top 1/4"PLN (9/16" OD)
2 x Bolts (Water Pump) 5/16"UNF (1/2" Head, 2" Long)
2 x Bolts (Water Pump) 5/16"UNF (1/2" Head, 1" Long)
4 x Washers (Water Pump) 5/16"PLN (5/8" OD)
4 x Washers (Water Pump) 5/16"SPR (1/2" OD)

Thermostat (Short)
3 x Bolts 5/16 UNC (1/2" Head, 1 1/2" Long)
3 x Washers 5/16" SPR (1/2" OD)

Engine Electrical
2 x Bolts (Alt' top) 5/16"UNF (1/2" Head, 2" Long)
1 x Bolt (Alt' Bottom) M8x20
1 x Nut (Alt' Bottom) M8 NyLoc
4 x Washers (Alternator) 5/16"PLN (5/8" OD)
4 x Washers (Alternator) 5/16"SPR (1/2" OD)
2 x Nuts (Alternator) 5/16"UNF (1/2" Head)
2 x Bolts Starter Motor 3/8"UNC (9/16" Head, 1 1/4" Long)
2 x Washers Starter motor 3/8"SPR (5/16" OD)
1 x Bolt (A+ Distributor) 5/16" UNF (1/2" Head, 3/4" Long)

Clutch Slave (Non verto)
2 x Bolts (Cyl Mount) 3/8"UNC (9/16" Head, 1" Long)
2 x Washers (Cyl Mount) 3/8"SPR (5/8" OD)
1 x Bolt (Arm Stop) 1/4"UNF (7/16" Head, 1" Long)
1 x Lock Nut (Arm Stop) 1/4"UNF (7/16" Head)

Clutch Cover
8 x Bolts 5/16"UNC (1/2" Head, 1" Long)
8 x Washers 5/16"SPR (1/2" OD)
8 x Washers 5/16"PLN (5/8" OD)

Tappet Chest
2 x Bolts 5/16" UNF (1/2" Head, 1 1/4" long)
2 x Washers 5/16 PLN (5/8" OD)

Pre A+ Distributor Drive
1x Bolt 1/4"UNF (7/16" Head, 3/4" long)
1x Washer 1/4"SPR (3/8" OD)

Fuel Pump 2 x Bolt 5/16" UNC (1/2 Head , 1 1/2"long)
2 x Washers 5/16" SPR (1/2" OD)
2 x Washers 5/16" PLN (5/8" OD)

Oil Filter Housing
2 x Bolt 3/8" UNC (9/16" Head, 1" Long)
2 x Washers 3/8" SPR
2 x Washers 3/8"PLN (15/16" OD)

Manifold Bolts
6 x Bolt 5/16 UNF (1" Long)
6 x Washers 5/16" SPR (1/2" OD)
6 x Washers 5/16" PLN (5/8" OD)

(i would double check them first though)

"Turbo's make torque, and torque makes fun"

"did you know you can toast potato waffles?"

Anton, would you be as kind as to share your list mate????

Every day is a school day ...........

How fast and how expensive ...... the same question...

yeah np's, this is the current list

http://uk.geocities.com/anthony.ashcroft@b...m/MiniBolts.xls

youre missing the box to block bolts/nuts
1/4" unf iirc?

i need a life

"Turbo's make torque, and torque makes fun"

"did you know you can toast potato waffles?"

how many do you need.. 11 iirc?

Nice job anton, keep it up!

Team www.sheepspeed.com Racing

anton your site doesnt work anymore! :( can you update or attach the list here?

Thanks