Page:
Home > Help Needed / General Tech Chat > anyone Know

Zeemax Power

621 Posts
Member #: 393
Post Whore

Oulton Park

30th May, 2007 at 05:22:27pm

Anyone no the the spanner size for the bleed nipples on the rear drumps and any other way of getting them undone plasted them in WD40 no joy cant find the size cheers

http://www.Zeemax.com

Nick
Forum Mod

User Avatar

4828 Posts
Member #: 154
Post Whore

Midlands

30th May, 2007 at 05:25:14pm

i use either a 6 or 7mm on mine cant remember, but i've seen loads of different sizes.

On 20th Oct, 2015 Tom Fenton said:
Well here is the news, you are not welcome here, FUCK OFF.

Star Mag

User Avatar

1745 Posts
Member #: 375
Post Whore

Leicestershire

30th May, 2007 at 05:34:14pm

Think there 1/4 af! but mine memorys crap!


turbodave16v
Forum Mod

10980 Posts
Member #: 17
***16***

SouthPark, Colorado

30th May, 2007 at 05:38:19pm

There are at least two different sizes - and I'm sure there is a metric sized one courtesy of cheapy manufacturing now aswell!

If they don't come off with WD, then you need a blue-tipped easy-off. I.E. Oxyacetylene. Don't go overboard - heat up the end/hex tpo cherry red for a few seconds, then use mole-grips to undo it.
You might want to acquire some spare nipples beforehand.

Heat will ALWAYS win over everything else, and do no damage to anything other than the bleed screw in this case.

On 17th Nov, 2014 Tom Fenton said:
Sorry to say My Herpes are no better


Ready to feel Ancient ??? This is 26 years old as of 2022 https://youtu.be/YQQokcoOzeY



Joe C

User Avatar

12307 Posts
Member #: 565
Carlos Fandango

Burnham-on-Crouch, Essex

30th May, 2007 at 07:17:09pm

indeed!

Nothing works like the good old hot spanner!

On 28th Aug, 2011 Kean said:
At the risk of being sigged...

Joe, do you have a photo of your tool?



http://www.turbominis.co.uk/forums/index.p...9064&lastpost=1

https://joe1977.imgbb.com/



BENROSS

User Avatar

9812 Posts
Member #: 332
Resident Cylinder Head Modifier

Mitsi Evo 7, 911, Cossie. & all the chavs ...... won no problem

30th May, 2007 at 11:30:58pm

all else fails, replace them they retail for around £7 each

should not brake the bank






Zeemax Power

621 Posts
Member #: 393
Post Whore

Oulton Park

30th May, 2007 at 11:40:55pm

thanx for that people there on a 1996 mini defo not 6mm smaller and the nipple was to big to get a shocket on the nut i would buy new like but i'm out in the sticks and ages to get bits off anyone just sorted out the carb now this i hope there free inside had to drill some out before now i'll try some heat tomorrow left them soak all night cheers

http://www.Zeemax.com

Rob Gavin

User Avatar

6729 Posts
Member #: 618
Post Whore

Glasgow

31st May, 2007 at 04:25:37pm

don't put too much heat into it incase you fry the seals
Home > Help Needed / General Tech Chat > anyone Know
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: