Page:
Home > Help Needed / General Tech Chat > Slave Cylinder push rod!

richminiturbo.

User Avatar

2370 Posts
Member #: 719
Post Whore

Horndean - Near Portsmouth

8th Jun, 2007 at 08:22:43am

Hi guys may sound like a stupid question but on the mini ive just bought the guy has fitted a new clutch slave and it has the verto clutch arm in it, but the push rod between the slave and the arm is missing, so ive ordered this:

http://www.minispares.com/Product.aspx?pid=33668


Just wondering how does the rod fix into the slave? I know the end with the eye on is held to the arm by a clevis pib but was just curious how the other end is held in the slave??

Thanks, Rich

MikeRace

User Avatar

6549 Posts
Member #: 1149
#1 Basshunter Fan

Force Racing ICT Dept Manager Miglia Turbo Am frum Yokshyer tha noes!

8th Jun, 2007 at 08:37:14am

Its just locates in there.

1/4 Mile 14.3secs 96Mph Terminal 10psi of boost.


Fibreglass Parts? - http://www.tdkracing.co.uk/
Split Rims? - http://www.force-racing.co.uk/


Vegard

User Avatar

7765 Posts
Member #: 74
I pick holes in everything..

Chief ancient post excavator

Norway

8th Jun, 2007 at 08:37:29am

The piston is concave. This along with the springs holds it in place.

On 13th Jul, 2012 Ben H said:
Mine gets in the way a bit, but only when it is up. If it is down it does not cause a problem.

richminiturbo.

User Avatar

2370 Posts
Member #: 719
Post Whore

Horndean - Near Portsmouth

8th Jun, 2007 at 12:39:45pm

Awsome so it just sits in there, thanks for the info!

Rich

Vegard

User Avatar

7765 Posts
Member #: 74
I pick holes in everything..

Chief ancient post excavator

Norway

8th Jun, 2007 at 02:14:20pm

Yup, just sits there like puke-stains on tarmac.

On 13th Jul, 2012 Ben H said:
Mine gets in the way a bit, but only when it is up. If it is down it does not cause a problem.
Home > Help Needed / General Tech Chat > Slave Cylinder push rod!
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: