Page:
Home > Help Needed / General Tech Chat > Master Cylinder - yellow band type!

richminiturbo.

User Avatar

2370 Posts
Member #: 719
Post Whore

Horndean - Near Portsmouth

7th Jul, 2007 at 08:15:23pm

Ello guys, got a yellow type master cylinder as im converting to non servo.

My question is, what size are the union holes on the master cylinder itself, the top one is smaller than the bottom one and from what ive heard they are both metric!!

Also the unions that go into the pressure regulating valve are 3/8's UNF arent they?

Just want to be sure before I go about getting some made up for me!

Any help would be really appreciated guys!

Ta,
Rich


Vegard

User Avatar

7765 Posts
Member #: 74
I pick holes in everything..

Chief ancient post excavator

Norway

9th Jul, 2007 at 09:28:47am

The are M10 and M12. You can manage to out a 3/8UNF in one of them. Don't do this!!

On 13th Jul, 2012 Ben H said:
Mine gets in the way a bit, but only when it is up. If it is down it does not cause a problem.
Home > Help Needed / General Tech Chat > Master Cylinder - yellow band type!
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: