Page:
Home > Help Needed / General Tech Chat > Piston Identification

Anton

User Avatar

1050 Posts
Member #: 764
Post Whore

Staffordshire

8th Aug, 2007 at 12:01:07am

Just poped the head of the g/f's mini. The lumps a bit of an unknown but i've noticed the dish in the pistons installed seem rather large. I could not find my syringe to measure them but they are marked as

M2210 C10H

Any ideas what spec they are or where the engine may have come from?

Vegard

User Avatar

7765 Posts
Member #: 74
I pick holes in everything..

Chief ancient post excavator

Norway

8th Aug, 2007 at 07:32:18am

Completely totally original 70ies Allegro/1300/Marina/1275GT pistons.

On 13th Jul, 2012 Ben H said:
Mine gets in the way a bit, but only when it is up. If it is down it does not cause a problem.

Anton

User Avatar

1050 Posts
Member #: 764
Post Whore

Staffordshire

8th Aug, 2007 at 07:52:51am

Cheers Vegard.. if its that old it explains why the bores are so worn.

Re-build time..
Home > Help Needed / General Tech Chat > Piston Identification
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: