Page:
Home > Help Needed / General Tech Chat > Quaife ATB

philc

1394 Posts
Member #: 1346
Post Whore

bromsgrove

12th Aug, 2007 at 08:30:03pm

i have just fitted my diff. Though i have not put any oil in it yet, when i turn the output shafts by hand, it turns freely until i get to a certain point then it becomes stiff. if i turn it back and forth at that point it will turn freely. Is this anything to worry out or will it free up once up and running?? thanks guys

Vegard

User Avatar

7765 Posts
Member #: 74
I pick holes in everything..

Chief ancient post excavator

Norway

12th Aug, 2007 at 10:02:55pm

Well, that's the way it works..

On 13th Jul, 2012 Ben H said:
Mine gets in the way a bit, but only when it is up. If it is down it does not cause a problem.

philc

1394 Posts
Member #: 1346
Post Whore

bromsgrove

14th Aug, 2007 at 08:28:46am

it has been suggested it may be something else in the gearbox binding. The gearbox has just been re-built. Though i had to change the diff ect. any thoughts?

joeybaby83

User Avatar

6274 Posts
Member #: 509
Post Whore

Isle of Man

14th Aug, 2007 at 08:44:13am

Did it bind before you put the quaife in?

If not then id def something to do with the dif.

Is it the new style or old style quaife?

Make sure none of the CW bolts are catching on the gearbox housing,

Joe

"Turbo's make torque, and torque makes fun"

"did you know you can toast potato waffles?"



fab

User Avatar

1497 Posts
Member #: 100
Parisien Turbo Expert

Paris\' suburb

14th Aug, 2007 at 11:45:19am

sometimes new synchros make this, oil them it should cure stiff synchros problem

Home > Help Needed / General Tech Chat > Quaife ATB
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: