10x7 Split rims!
Turbo Mini Forums

Whats the price of these,What options are there and who does them?



and last question, What arches are needed!

Thanks, Radleigh

Lightweight racer coming soon.

http://www.foxwebsitedesign.co.uk/6.html

One question

Can you get road leagal tyres for those?

A008's, A032R's go on em so yup.

and think wolfie has them with sportspack, works very well

no longer a series, but still 1.3 turbo.

why not try some 10*6?

http://www.specialist-components.co.uk/cnb...odCategoryID=30

21/4 arches needed

- see them at MITP

Johnk

If Carling made Mini engines
it would probably be like this one!

If the a008r's and A032r's are already stretched on a 6" rim, whats the point on putting them on a 7" rim, surely it defeats the point as the contact patch wont be any bigger. Roll might be some what reduced however

Edited by Sprocket on 12th Aug, 2007.

Only point is that they dont do a road leagal tyre for 7" wide so
the 165's have to do.

Force wheels all the way.

Ah, coolio, its cosmetic rather than performance

I had a set of 7x10 force wheels and they certainly gave less tyre roll than narrow sizes. However, you will have interesting steering. I have gone back to 5x10's as they make the car better to drive IMO

Bugger off, I'm getting there.

On 12th of Aug, 2007 at 10:01pm Radleigh said:
Whats the price of these,What options are there and who does them?



and last question, What arches are needed!

Thanks, Radleigh

WWW.FORCE-RACING.CO.UK PLEASE CLICK HERE

i went for the mb rims, although if i knew how long the wait would have been i would have gone for the force ones!

You have no hubs andy!!! Is this a weight saving method. LOL

Back once again like a renegade master

Cant see the masking tape holding the arches at 103mph over the 1/4 either

fastcarl - TBH, Im not overly fussed on style of the rim, Either way it will look good! Just want a decent set of 10x6 or 10x7

andywaller - What arches are they! Looks pukka

Lightweight racer coming soon.

[quote=Radleigh,13th of Aug, 2007 at 09:16pm]fastcarl - TBH, Im not overly fussed on style of the rim, Either way it will look good! Just want a decent set of 10x6 or 10x7

andywaller - What arches are they! Looks pukka

/quote]
surely you are concerned that your hard earned is not spent on some ugly wheel[ if there is one] just because its 3 piece and 7" wide,if so,
that must just leave availability and cost,lol

carl

WWW.FORCE-RACING.CO.UK PLEASE CLICK HERE

MB is not readily or easily available, so it leaves you with specialist components (johnK), force racing (fast carl) + kodiak in the US and spectrum.

I thought Kodak make camera film?

yes, that too:) (PS it MAY be another company, and they are canadian, not american)

Edited by miniminor63 on 13th Aug, 2007.

So when was KodIak and Kodak the same.
[img]http://www.turbominis.co.uk/iain/up/red_x.jpg
[/img]

im not sure about weight saving!
altought im going to be getting ally radius arms and hubs!

the arches are curley miglia carbon ones they just dont show the weave.

there is now an mb racing website

all i will say is good luck getting them inside of 6 months if you do try!

just took a look through the mb-racing wheels site

strangely enough this picture in the gallery looks like the car is running spectrums??

http://www.mb-racingwheels.com/MB-Wheels.jpg


mmmm....

Guys you can get very wide road legal 10" tyres (225s!), You will find them on quads!

I have some force 6" ones.
They are covered by narrow group 2's and I have not had to trim the arches. (N.B disk brakes not drums)

Although the hi-lows are not on full drop.

I also have some 7" mini special split rims (but they haven't been fitted yet)