| Page: |
| Home > Help Needed / General Tech Chat > Can't start, won't start | |||||||
 530 Posts Member #: 1192 Post Whore In the garage......again!! |
24th Aug, 2007 at 07:39:51pm
Does anyone know where the inhibitor switch is on a 998 auto?, the reason i ask is i tried to turn the engine over on my turbo with the key and i get nothing at all. I'm sure all the wires are in place and in the right place, i'm assuming the original inhibitor switch may be the cause. I just need to know its whereabouts so i can join the wires together.
133.5 bhp 123 lb torque 116mph @6640rpm 9.5psi
|
||||||
|
Site Admin  15302 Posts Member #: 337 Fearless Tom Fenton, Avon Park 2007 & 2008 class D winner & TM legend. |
24th Aug, 2007 at 07:48:56pm
In the old gear selector mech.
On 29th Nov, 2016 madmk1 said:
On 28th Nov, 2016 Rob Gavin said:
I refuse to pay for anything else Like fuel 😂😂 |
||||||
|
530 Posts Member #: 1192 Post Whore In the garage......again!! |
24th Aug, 2007 at 07:52:18pm
Ah, I dont have that anymore, will there be wires that used to go to the selector? like near the reverse switch?
133.5 bhp 123 lb torque 116mph @6640rpm 9.5psi
|
||||||
|
Site Admin 15302 Posts Member #: 337 Fearless Tom Fenton, Avon Park 2007 & 2008 class D winner & TM legend. |
24th Aug, 2007 at 07:59:47pm
On 24th of Aug, 2007 at 07:52pm chinlesswonder said:
, will there be wires that used to go to the selector? I've no idea, go and look.
On 29th Nov, 2016 madmk1 said:
On 28th Nov, 2016 Rob Gavin said:
I refuse to pay for anything else Like fuel 😂😂 |
||||||
|
530 Posts Member #: 1192 Post Whore In the garage......again!! |
24th Aug, 2007 at 08:27:42pm
already have, non in the car or underneath in the tunnel, would an inhibitor stop an engine turning over or just cut power to the ignition coil to stop it firing. 133.5 bhp 123 lb torque 116mph @6640rpm 9.5psi
|
||||||
|
Site Admin 15302 Posts Member #: 337 Fearless Tom Fenton, Avon Park 2007 & 2008 class D winner & TM legend. |
24th Aug, 2007 at 08:35:54pm
From vaguely looking at a wiring diagram some years ago I've a feeling it interrupts the signal wire from the ign barrel to the solenoid.
On 29th Nov, 2016 madmk1 said:
On 28th Nov, 2016 Rob Gavin said:
I refuse to pay for anything else Like fuel 😂😂 |
||||||
|
530 Posts Member #: 1192 Post Whore In the garage......again!! |
24th Aug, 2007 at 08:40:12pm
thank you Tom. 133.5 bhp 123 lb torque 116mph @6640rpm 9.5psi
|
||||||
|
530 Posts Member #: 1192 Post Whore In the garage......again!! |
24th Aug, 2007 at 08:47:13pm
Found the wiring for the inhibitor, behind the dash, joined them together and it now cranks for oil pressure.
133.5 bhp 123 lb torque 116mph @6640rpm 9.5psi
|
||||||
| Home > Help Needed / General Tech Chat > Can't start, won't start | |||||||
|
|||||||
| Page: |