Page:
Home > General Chat > Rolling road

Turbo Phil

User Avatar

4635 Posts
Member #: 20
My sister is so fit I won't show anyone her picture

Lake District

Does anybody have any contact details for Peter Baldwins RR ?
Website ?

Cheers
Phil. *smiley*

WWW.TURBO-MINI.COM


giallofly

User Avatar

I helped keep this site alive!

4436 Posts
Member #: 164
The Stig..

Newport Pagnell

01223 207217. He is very good. Rollers read on the high side, but your car will run properly when he's done.

On 21st Jan, 2011 fastcarl said:


therefore acheiving two things , a sore knob and a beer bellyl




Carl

User Avatar

2924 Posts
Member #: 95
Post Whore

liverpool-on-sea

where is he based?

no longer a series, but still 1.3 turbo.

On 28th Nov, 2008 Sprocket said:
Oh now that is a long shaft you have Carl.


giallofly

User Avatar

I helped keep this site alive!

4436 Posts
Member #: 164
The Stig..

Newport Pagnell

Cambridgeshire. Near walpole.

On 21st Jan, 2011 fastcarl said:


therefore acheiving two things , a sore knob and a beer bellyl




wil_h

User Avatar

9258 Posts
Member #: 123
Post Whore

Betwix Harrogate and York

His rollers read high is an understatement.

He knows his stuff but I reckon Miniwilliams wod get arounf 230+ on baldwins rollers.

Wil

Fastest 998 mini in the world? 13.05 1/4 mile 106mph



On 2nd Jan, 2013 fastcarl said:

the design shows a distinct lack of imagination,
talk about starting off with a clean sheet of paper, then not bothering to fucking draw on it,lol

On 20th Apr, 2012 Paul S said:
I'm mainly concerned about swirl in the runners caused by the tangential entry.


giallofly

User Avatar

I helped keep this site alive!

4436 Posts
Member #: 164
The Stig..

Newport Pagnell

Mine ran 170bhp on his then on another rollers just a few days after 140 on my old (old old). then 200bhp the day before the turbominis RR day, did 165 ish with that weeping headgasket.

You are not paying for a big figure just the piece of mind your engine will not melt down and run correctly.

I recommend him.

Ask him his pricing before you go.

On 21st Jan, 2011 fastcarl said:


therefore acheiving two things , a sore knob and a beer bellyl




turbodave16v
Forum Mod

10980 Posts
Member #: 17
***16***

SouthPark, Colorado

Do you not reckon MiniMaster min penrith might be a better bet phil?

On 17th Nov, 2014 Tom Fenton said:
Sorry to say My Herpes are no better


Ready to feel Ancient ??? This is 26 years old as of 2022 https://youtu.be/YQQokcoOzeY



Richspec

User Avatar

552 Posts
Member #: 300
Post Whore

Cumbria

No *laughing*

Here for the craic..

Supercharged Arden powered


Miniwilliams

User Avatar

5329 Posts
Member #: 140
Proven 200+bhp & Avon Park 05,06,07 Class D 3rd place

Yes i've also have heard it does run High,
(wil_h, most people round my way say it would be nearer to 250 bhp if i used them*wink* LOL)

But like it has been said your paying for it to be set up the right way and that's what counts! blown engines are no good to any one.

And what does it matter if there are out, as long as you keep to the same rollers, you'll then know if your gaining of losing power from each mod that's done.

It's just a shame you can't come to my R R i use In Essex, The Blokes a genius!

Edited by Miniwilliams on 17th Jun, 2004.

Best 1/4 mile 13.2 seconds @116 mph
First 5 port miniturbo to make over 200 bhp on a carb?
First 5 port miniturbo to make over 200 bhp on Injection?

http://www.mattwoodsphotography.com


giallofly

User Avatar

I helped keep this site alive!

4436 Posts
Member #: 164
The Stig..

Newport Pagnell

Blimey MW have you had a bump on the head?..all made sense and only 1 smiley! lol!

On 21st Jan, 2011 fastcarl said:


therefore acheiving two things , a sore knob and a beer bellyl




AlexF2003

5795 Posts
Member #: 80
AFRacing LTD

Newbury, Berks

Which rr is that Matt?

alex

AlexF


Miniwilliams

User Avatar

5329 Posts
Member #: 140
Proven 200+bhp & Avon Park 05,06,07 Class D 3rd place

Alex I use T&M In Essex LOL:):):):):) *wink**wink**wink* How that!
Been using them now for Many Years.

Edited by Miniwilliams on 17th Jun, 2004.

Best 1/4 mile 13.2 seconds @116 mph
First 5 port miniturbo to make over 200 bhp on a carb?
First 5 port miniturbo to make over 200 bhp on Injection?

http://www.mattwoodsphotography.com


AlexF2003

5795 Posts
Member #: 80
AFRacing LTD

Newbury, Berks

not heard of them...

any good?

Alex

AlexF


Miniwilliams

User Avatar

5329 Posts
Member #: 140
Proven 200+bhp & Avon Park 05,06,07 Class D 3rd place

No Mate they are _hit, that's why i keep going back there YEAR after YEAR after YEAR! o:

Best 1/4 mile 13.2 seconds @116 mph
First 5 port miniturbo to make over 200 bhp on a carb?
First 5 port miniturbo to make over 200 bhp on Injection?

http://www.mattwoodsphotography.com


AlexF2003

5795 Posts
Member #: 80
AFRacing LTD

Newbury, Berks

lol

AlexF


Miniwilliams

User Avatar

5329 Posts
Member #: 140
Proven 200+bhp & Avon Park 05,06,07 Class D 3rd place

Silly billy*wink* *happy*

Best 1/4 mile 13.2 seconds @116 mph
First 5 port miniturbo to make over 200 bhp on a carb?
First 5 port miniturbo to make over 200 bhp on Injection?

http://www.mattwoodsphotography.com


Turbo Phil

User Avatar

4635 Posts
Member #: 20
My sister is so fit I won't show anyone her picture

Lake District

Cheers for the info guys.
Nearly run in now, should be ready for the rollers soon.

Phil. *smiley*

WWW.TURBO-MINI.COM

Home > General Chat > Rolling road
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: