fuel pump queiry
Turbo Mini Forums

at the moment i dont have my turbo engine at my house so havnt checked yet but i did a mockup of the turbo exhuast manifold and inlet manifold on my N/a engine with the mechanical standard fuel pump. the turbo fould the pump.

my question is as it will be an eltrical fuel pump i will be using is this pump done away with and a blanking plate put where it sits or will i have to do some rethinking? eg turbo on upsdide down.

yours paul.

Drives
-Ford S-max Mk2 Ecoboost
-Rover 100 VVC #2 - track project

Searching is all you need on TurboMinis

you will be binning the mechanical pump on the engine. yes fit a blanking plate this is used for the oil return from the turbo on the original turbo set up

no longer a series, but still 1.3 turbo.

thank you for clarafing that, i forgot about the oil return feed :$

Drives
-Ford S-max Mk2 Ecoboost
-Rover 100 VVC #2 - track project

Searching is all you need on TurboMinis