t2 on standerd manifold with no body modifications???????
Turbo Mini Forums

Some people i spoke say it can be done.
you make a adaptorplate in a angle à voila.
Has anyone done this? or knows someone with this solution.

The other option is the Mirage set up:)

but i the money is holding me back so far, HELP i cant decide

Edited by paneermeel on 14th Dec, 2007.

there is nothing wrong with a A-series that a turbo can't fix.

www.turbomini.nl

It's been covered before. NO, you can't!

did some search but didn't found it, sorry :$

if it isn't possible i know were my christmas bonus is going to. i only have to work out how to tell my girlfriend :-

there is nothing wrong with a A-series that a turbo can't fix.

www.turbomini.nl

Just don't tell her come clean when she finds it.

Edited by minimole23 on 14th Dec, 2007.

or buy her something nice first!

In the 13's at last!.. Just

You can fit a T2 on a Metty manifold, Jimster sells the adaptor plates but you'll still need a bulkhead box.

there is nothing wrong with a A-series that a turbo can't fix.

www.turbomini.nl

Mirage or bulkhead box i believe.

why dont you want a bulkhead box??

Edited by MarkGTT on 14th Dec, 2007.

Just to be difficult i'd say it could be possible...

i never take the easy way but the way that i beleave is 100%
and as much i want the sound and power off a turbo i just can set myself to make a box if it isn,t needed, hail mirage

one other option is to make my own manifolds like Turbo Tel. but how the end result will be??????????

there is nothing wrong with a A-series that a turbo can't fix.

www.turbomini.nl

i pm-ed Mirage that he can make and send a package to me.

ps: girlfriend is informed

hohoho merry christmas

there is nothing wrong with a A-series that a turbo can't fix.

www.turbomini.nl

it can be done very easily,
don't use an adaptor plate ,
drill/tap the new bolt pattern on mety manifold work out the t2 inlet lightly larger,
then just use later cooper/bo 1300 engine mount on sub
tilt a little the engine to the front
job done
it will also give a little more ground parallel driveshafts for lowered minis

i already sold the metty one i had, so i won't be a option no more for me.

now i have to wait untill i get a pm back.
couldn't reach him on the phone, damm.

well i just have to be patience and wait..............

pomdidom

there is nothing wrong with a A-series that a turbo can't fix.

www.turbomini.nl

Edited by Turbo Tel on 31st Dec, 2007.

website:- http://www.terryhunt.co.uk

hahaha,

with the end result i ment: How would it look???? your's looks great but i will be honest. Mirage cost some money but all the work has been done and it looks damm fine. i now i'm a lazy f.cker but i like it

ps: the waiting has worked. I got in contact with Richard from Mirage.

there is nothing wrong with a A-series that a turbo can't fix.

www.turbomini.nl

Yes I would agree the Mirage looks great. My problem was the exchange rate and paying for the extra bits that come with it that I would not need for a GT15, so It was much too expensive in my view.
I am well pleased with my fabricated one, but yes its a hell of a lot of work. Next time I would make it out of s/s and pay someone to TIG it up.

There was another guy on TM looking at selling a similar manifold, do a search..


Terry

website:- http://www.terryhunt.co.uk